Здравствуйте, Гость

0 Пользователей и 1 Гость просматривают эту тему.

Привет, пожалуйста, простите мой плохой русский, я использую Google Translate изменить с английского!
У меня есть палка USB памяти, который разделен на два диска, 1: CD-ROM раздела, 2: 2 Гб обычный раздел. Я хочу удалить CD-ROM раздела и просто нормальные палки USB.

Я не уверен, какой размер чипа памяти на самом деле. ChipGenius говорит, что это действительно 4GB!

ChipGenius результаты: -
Description: [F:][G:]USB Mass Storage Device(Generic/Generic Autorun Disk/Flash Disk)
Device Type:        Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA

USB Device ID: VID = 058F PID = 6387
Serial Number: 3A09F8C9

Device Vendor: Generic
Device Name: Mass Storage
Device Revision: 0103

Manufacturer: Generic/Generic
Product Model: Autorun Disk/Flash Disk
Product Revision: 8.00/8.01

Chip Vendor: Alcor Micro
Chip Part-Number: SC708(FC8708)/AU6987/AU6990 - F/W E403
Flash ID Code: 45D79432 - SanDisk - 1CE/Single Channel [MLC] -> Total Capacity = 4GB

Tools on web:       .


Я открыл палку USB и можно увидеть следующие чипы и маркировка: -

Контроллер: Alcor Micro
AU6987HL-5
CCAV1J-10F
11521963

Память чипа:
TC58NVG5D2F
H111202-2017

Чип памяти также имеет эти цифры на: -
P2 4 B 20 T M

BO
4

ТАЙВАНЬ

PCB имеет следующие маркировки: -
печатная плата
Www.sun-EASY.COM
DLK-698X-V

SY U3

Я пытался использовать различные типы AlcorMP.exe, но я не могу заставить его работать. Я постоянно получаю "50400: Слишком много плохих блоков ошибка плохой блок 2048/2048."

Пожалуйста, кто может мне помочь?
Спасибо от Англии!

Оффлайн nat27

*
  • *****
  • 2854
Hello from Russia!
At first we delete CDROM by means of CDROMRemover

Now we use special edition of AlcorMP.eD3 for USB FlashDrive with memory of TOSHIBA, SanDisk:

AlcorMP(101216.eD3)   - 3,64Mb
AlcorMP(110127.eD3)   - 3,60Mb
AlcorMP(110331.eD3)   - 3,60Mb
AlcorMP(110511.eD3)   - 3,62Mb
FCMPTool(050006.eD3) - 2,49Mb
FCMPTool(050008.eD3) - 2,47Mb
AlcorMP(111111.eD3)   - 2,58Mb
AlcorMP(120213.eD3)   - 2,69Mb
AlcorMP(120817.eD3)   - 2,84Mb
FCMPTool(050200.eD3) - 2,57Mb
FCMPTool(050204.eD3) - 2,61Mb.
AlcorMP(120926.eD3) - 2,74Mb.

Probably Transcend JFOnlinerecovery will help
It is necessary to use WindowsXP SP2 32bit
Hi Nat,

Thank you for your reply.  I removed the CDROM using the utility - this worked ok.  Now I have a USB drive of 1.83 GB.  I still do not know if Chipgenius is correct in telling me that it is 4GB ?

I tried each of the different AlcorMP programs you listed, but none of them would see the existence of the USB drive :-(  Do I need to 'load driver' ??

I must confess, I do not really understand what I am doing - I do not know what OnLineRecovery or FCMPTool are for !  Do I need them ?

I try to read the PDF instructions, but they are in Russian, and Google Translate does not make much sense.

Do you have any instructions for an idiot ? :-)

Thanks !

Оффлайн nat27

*
  • *****
  • 2854
The special version AlcorMP(091111)_aneng for Flash ID Code: 45D79432 AU6987 Total Capacity = 4GB (Probably will help)

For the utility of AlcorMP use WindowsXP SP2 32bit

;D Instructions for idiots aren't present. Idiots of a USB Flash Drive don't repair.
« Последнее редактирование: 25 Ноября 2012, 18:45:22 от nat27 »
Привет Nat,

Спасибо за специальную версию. К сожалению, он также не признает диск USB, но для Windows видит его как 2 Гб. AlcorMP.exe говорит: "Устройство Count = 0 '.

У меня нет компьютера с Windows XP SP2. У меня XP SP3 и Windows 7 64bit (я пытался работать в режиме совместимости XP SP2, но нет никакой разницы).

Есть SP2 важно?

Когда я подключите диск USB, Windows видит 2GB раздела. Тогда я запускать специальную версию AlcorMP.exe и он говорит: "концентратор изменилась конфигурация, пожалуйста, отключите все устройства флэш-накопителя USB, MP перезапуска программы или нет", то я отключаю диск USB и подключить обратно, и Windows, говорит: "Обнаружено новое устройство" , и AlcorMP.exe начинается, но все равно не видит USB диск.

Спасибо вам большое за вашу помощь!

Оффлайн nat27

*
  • *****
  • 2854
At first we start AlcorMP, then we connect USB Flash Drive (UFD).

There will be RE START MP PROGRAM message, disconnect UFD and we click OK, then again we start AlcorMP.

We connect UFD and in the main AlcorMP menu there should be information on Flash Drive

We click Start and Flash Drive will be restored on 4GB volume.

WindowsXP SP3 x86 is suitable for AlcorMP if RE START MP PROGRAM message doesn't repeat cyclically.
Hi Nat,

I start AlcorMP.exe, wait a little, then insert USB drive.  There is no 'Restart MP Program MP" message :-(  AlcorMP.exe just does nothing, saying 'device count=0'.  However, Windows detects the USB drive, says "Installing new hardware" and shortly afterwards, the USB drive is visible.

Maybe I have confused the registry ?  I have four USB drives, all the same, and I have tried pressing every button in AlcorMP and have run every program in the Alcor folder !
I should add that yesterday. 'Restart MP' message DID appear, but today... nothing. ?!

Оффлайн nat27

*
  • *****
  • 2854
Good morning!

Other AlcorMP versions also don't work?
Then LowerFilters which is added in system at AlcorMP start incorrectly works.
I consider as an operating system only Windows XPSP3. There can be Windows components block MPTool work.

Use other MPTool versions,

http://tagievara.narod.ru/pages/programs/flash/alcor.html

for example, FCMPTool, is the similar program. At your USB Flash Drive strange (rare) Flash ID Code: 45D79432. At some utilities there is Flash ID Code: 45D79532 therefore in special edition of AlcorMP I corrected the section Flashlist.ini and replaced with it original:

original
[341]
Brand=SanDisk
FlashName=SDTNMMBHEM-004G
FID=0x45,0xD7,0x95,0x32,0x00,0x00
FlashType=MLC
Size=4096
MaxBank=1
CE=1
....


corrected section
[341]
Brand=SanDisk
FlashName=SDTNMMBHEM-004G
FID=0x45,0xD7,0x94,0x32,0x00,0x00
....
Re: Помогите пожалуйста - Какой это размер чипа?
« Ответ #9 : 02 Декабря 2012, 23:38:26 »
Hi,

I tried AlcorMP(11.12.26.00) and this recognised the flash drive, BUT - it says it is only 2GB.  When I click 'Start', it checks for bad blocks, up to 100%, then says "Too Many Bad Blocks".  Chipgenius still says the flash drive is 4GB.

Alcor081208 says "20000 - Invalid Device Error.  Bad Block 0/0".

Alcor101026 does not see any flash drive

Alcor 120210 sees the flash drive as 4GB (Flash_Name: SDTNNMAHEM-004G(SDTNNMAHEM-004G)

ID[0]: 0x45,0xD7,0x94,0x32,0x76,0xD5, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
ID[1]: 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
ID[2]: 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
ID[3]: 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
ID[4]: 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
ID[5]: 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
ID[6]: 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
ID[7]: 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF

But... when I click START, it says ERASE (0-100%), then it scans for bad blocks (0-100%) and finishes with "50400 Too Many Bad Block Error.  Bad Block 2048/2048".

AlcorMP6.21_1227  does not see the flash drive at all.

I am very confused now ! :-(