Здравствуйте, Гость

0 Пользователей и 1 Гость просматривают эту тему.

DataTraveler G4 USB 3.0
« : 20 Января 2018, 14:30:48 »
Help me with this pendrive please. I don't know what to do.  :-\

Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
Current Speed: High Speed
Max Current: 498mA

USB Device ID: VID = 0951 PID = 1666
Serial Number: 60A44C3FACDCBF71797700DC

Device Vendor: Kingston
Device Name: DataTraveler 3.0
Device Revision: 0100

Manufacturer: Kingston
Product Model: DataTraveler 3.0
Product Revision: PMAP

Controller Vendor: Phison
Controller Part-Number: PS2251-07(PS2307) - F/W 01.02.53 [2014-03-05]
Flash ID code:      983AA892 - Toshiba TC58NVG7T2JTA00 [TLC-8K]
Re: DataTraveler G4 USB 3.0
« Ответ #1 : 20 Января 2018, 15:21:59 »
Solved with MPALL_F1_7F00_DL07_v503_0A, BN07V502TAW (burner) and FW07V50253TW (firmware). :D
DataTraveler G4 USB 3 0
« Ответ #2 : 16 Сентября 2018, 22:09:35 »
So In here with some help I will try to format USB using Manufacturer tool  As disscused before...with ChipGenius v4.00  I found This:
DataTraveler G4 USB 3 0
« Ответ #3 : 07 Декабря 2018, 04:25:41 »
I have this error with this Toshiba Transmemory 16GB USB.
VID:04B3 PID:3025

I have successfully flashed a Kingston that had the same error using Phison UPTool but that would only leave the drive "usable" erasing everything.


The I/O refers to the controller, right? I could "just" do a chip-off recovery.