Форум - FlashBoot.ru

Hi, i have a transcend flash model: HV70/8G ,chip's name is SPANSION
how repair it?
thanks

SPANSION - is a Flash memory chip.
What about controller?
         Online Recovery Tool

hi
thanks for your reply

but, this program not detect my flash.

in first my flash vid:3822 and pid:590C

i use Phison_UP8-R_Format for this flash, the format not completed and flash vid,pid is changed

new vid:12E3 and pid:0712

how i can restor orginal vid and pid?

please help me

and excuse me for my poor english.

VID / PID is part of the firmware. Change can be in the firmware. If the controller Phison a utility to its firmware does not allow you to change the VID / PID, and only correct from the standard.
This does not affect the efficiency of the device.
You better open flash case and say labeling the controller (like PS2233 or UP8).

chip name is Spansion
have a this code: AL016M90BA101

vid and pid change by Phison_UP8-R_Format

now, not detected by Alcor Program

3. Name of the controller (bottom left chip with 48-pin on all sides)
4. Name of the memory chips. (48-pin to-side) / / HY27UF161G2M (If there is a sticker, then we write that under the sticker!)


Сontroller name is important to select tools!
ps:
Utilities "PHISON" suitable for controllers "PHISON ****" and" UP ** "
Utilities "ALCOR" NOT suitable for controllers "PHISON ****" and" UP ** "