2268 PRAM USB DEVICE

[murat.karagoz]

I have just bought a Kingston Datatraveller SE9. It has Phison PS2251-68 chip controller.

I had worked as normal until I used Phison MPALL v3.70.0E. I think it caused TEST MODE.(So I cannot return it back.)
I cannot revert it. Because Phison MPALL v3.70.0E gives MODE 255 error.

UFD_Recover_Tool doesn't work due to wrong vendor id and product id.


Could you help me?


Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 50mA

USB Device ID: VID = 13FE PID = 3E00

Device Name: 2268 PRAM
Device Revision: 0110

Product Model: 2268 PRAM
Product Revision: 1.00

Chip Vendor: Phison
Chip Part-Number: PS2251-68(PS2268) - F/W 01.00.10 [2013-02-04]
Flash ID Code: 98DE9892 - Toshiba [TLC]

[Mkowacom]

Can you please tell me where the value is stored what file name for the setting - USB device packet size in the "Custom USB device parameters" section.

thank you.

[Menlnut]

I could not get the ENTTEC unit working under Mavericks. Can anyone recommend an alternative USB DMX device?

[Aarontoory]

When ever I try to plug my wheel into the PC it comes up with usb device not recognized.

[Andreykasam]

ProgDVB must work in near all DVB-T device.
try remove all modules.ebda files if you have some driver crash.

[Marieeveby]

I think what ever is missing is a small piece, I wonder what the message reference to "Writing default USB stick config file" is.

[Anthontab]

Our software relies on an USB base driver of Windows. If this driver can't communicate with this device, then our software can't do it too.

[DylesEmime]

Just as an FYI, I have never been able to get a USB video capture device to work properly in a guest.  Timing is just not good enough for it to work.