Автор Тема: Восстановление Flash USB Phison 2251-68  (Прочитано 318 раз)

Ден

  • Новичок
  • *
  • Сообщений: 1
Восстановление Flash USB Phison 2251-68
« : 19 Апреля 2017, 21:58:16 »
Флэшка работала исправна, при прошивке выбрал другую вместо нужной, и залил какую-то непонятную прошь во флэшку с объемом 4гига. контроллер , флэш айди определяются, вот только память видит 8 гига. при пользовании UP Tool выдает ошибку что нету столько памяти.  то есть пытается форматнул объем которого нет.
[ 2017-04-19 21:46:09 ]
  OS Version: Win 7
  MP Version: 2.093 (2015.01.14)
  PC Name   :  []
  DUT Slot: 5
  Driver  : K
  IC Type : 1E-2
  ISP Type: 1
  F-Slot  : 1

   0:00.0 -------------------------------------
   0:00.0 New Flow Initial ... 2093
   0:00.1 + INQ:........        2268 PRAM       1.00PMAP1234
   0:00.1 + Install ISP : ISP61.BIN
   0:00.1 + Jump ISP:
   0:00.1    - INQ:........        2268 PRAM       1.00
   0:00.1    - Stage: ROM code.
   0:03.7    - INQ:........        2268 SORTER V1.01.00
   0:04.8 + ISP Version : OS68 Ver 1.08k (2015.02.06-3)
   0:04.8 + Flash Unit Index = 601 / (1801) / 688
   0:04.8    - ID:   98-DE-88-A3-72-51 x 1
   0:04.8    - Mask: FF-FF-EF-FF-FF-8F
   0:04.8    - Flash Parameters : 15nm,x8,1428,128,32, HW.ECC=60,844
   0:04.8      Flash Notes: Toshiba 1znm eD3 (2015.01.21)
   0:04.9 + New CE Mode_3=00, CEMask=01
   0:05.1 + ECC setting : 60, 60, 50
   0:05.1 * Model=1E-2-1
   0:05.1    - UP23N,          TC58TEG6TGLTA00(eD3.16K)
   0:05.1 + Total effective blocks = 1 x 1 x 1428 = 1428
   0:05.1 + Bad Column Init ...
   0:05.1  >>> Flash Not Support OBC <<<
   0:05.1 -------------------------------------
   0:05.1 Test & Scan Stage ... 1 FSlot mode
   0:05.1 [ Low Level Format + TestMode=6 ]
   0:05.1   >> SmartEcc=1, Ecc=15
   0:05.1   >> Mode=3, Optimize=0, SizeMode=2
   0:05.1   >> Max ECC = D1(45), D3(20,50,D1+D3=50)
   0:05.1 -------------------------------------
   0:05.1 + Smart Test ... 0000-0000
   0:05.1 + Free PC RAM: 1935/4049 MB
   0:05.1 + INQ:........        2268 SORTER V1.01.00PMAP1234
   0:05.1 + ISP Version : OS68 Ver 1.08k (2015.02.06-3)
   0:05.1 + GPIO = FF,06,FF,FF
   0:05.1 + New CE Mode_3=00, CEMask=01
   0:05.3 + ECC setting : 60, 60, 50
   0:05.3 + Set Retry Table (15 eD3 D1).
   0:05.3 + CE=1, Page Layout Mode = 0, MaxWL=128
   0:05.3 + Total effective blocks = 1 x 1 x 1428 = 1428
   0:05.3 +-----------------------------------------------------+
   0:15.8 * Erase takes 00:00:10, (Found 8 NoResponse Blocks) 8, Continue Error=1
   0:51.0 + Smart Flash Pin Check takes 00:00:35, 128 Pages are OK, 0 Pages Error
   3:00.9    --- Full Page Mode (128) --
   3:00.9 +-----------------------------------------------------+
   4:05.5    Loop:0 Final CE:0 Pln:0 G Array:11111100-00000000-00000000-00000000-00000000-00000000-00000000-00000000-00000000-00000000-00000000-00000000-00000000-00000000-00000000-00000000
   4:05.5    + CE:0 Pln:0 Big Diff Mark bad Mode is ->Mark Bad WL
  18:29.1    Loop:1 Final CE:0 Pln:0 G Array:00000011-11111111-11111111-11111111-11111111-11111111-11111111-11111111-11111111-11111111-11111111-11111111-11111111-11111111-11111111-11111111
  18:29.1    + CE:0 Pln:0 Big Diff Mark bad Mode is ->Mark Bad WL
  18:29.1 * Write/Read takes 00:15:28, Found 0/1428 Big Difference Block
  18:29.2 + Error Calculation-1 ... Select Max Error = 45
  18:29.2 + Remove 0 Worst WL
  18:29.2 + D1 Advance Read ... 45+0-FFFF, (SG=10) Limit=0,0,65, RREcc=35/35
  18:29.2  - Check Point1:1428/100,Check Point2:1428/3.00
  18:29.3 * Advance Read takes 00:00:00, Found 0/0, AlmostAllBad=1420, Good=0, AlreadyBad=8
  18:47.2 + Finding Best Mode  ... M=1,E=45,P=0,S=FFFF,Opt=11 --> 0(0)
  18:48.0 + Finding Best Mode2 ... M=1,E=45,P=0,S=FFFF,Opt=11 --> 0(0)
  18:48.0 + [Find Best Mode] Pickup-1, 0>=0, Mode=1, 1:[0,128,FFFF,17.925], 2:[0,128,FFFF,0.811]
  18:48.0 + Calculate_GoodBlocks: (Mode=1, Mask=FFFF,45), Flag=0002
  18:48.0    - Good Blocks=0, Bad Blocks=1428
  18:48.0 + Calculate Disk Size: (Mode=1, Mask=FFFF, Ecc=45)
  18:48.0    - FW Spare = 32,41
  18:48.0    - CE=0,DIE=0, Plane=0: Good Block(E=0,O=0,F=0)=Size(-82,-82,-164)
  18:48.0    - Mode=1: (E=0,O=0,F=0), Size=0 MB, HP=02
  18:48.0 + Calculate_GoodBlocks: (Mode=2, Mask=FF,255+60), Flag=0002
  18:48.0    - Good Blocks=0, Bad Blocks=1428
  18:48.0 + 55AA Test Result-0: Good Block=0
  18:48.0 +-----------------------------------------------------+
  18:48.0 + Reverse Test ... ... (FFFF), DWL=0, Tm=50, TestPage=0-th
  18:48.1    + 0 Block been tested, 0 New Error Block
  18:48.1 + Double Check Block Scan ... 0-0(FFFF), Marker=C2
  18:48.1    + 0-0-0000: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0040: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0080: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-00C0: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0100: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0140: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0180: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-01C0: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0200: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0240: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0280: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-02C0: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0300: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0340: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0380: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-03C0: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0400: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0440: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0480: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-04C0: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0500: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0540: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  18:48.1    + 0-0-0580: XXXXXXXXXXXXXXXXXXXX
  18:48.1    - 0 Block been scanned, 0 New Error Block
  18:59.5 * Erase takes 00:00:11, (Found 0 NoResponse Blocks) 8, Continue Error=0
  18:59.5 + New ISP to Save IB Table.
  18:59.6 + Free PC RAM: 1382/4049 MB
  18:59.6 [DefectBlock] .. C3
  18:59.6 + CE-0(Die-0): ### All Bad ###
  18:59.6    - Total 1428 Bad Blocks
  18:59.6 O.PA[]=OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
  18:59.6 O.SA[]=OOOOOOOOOOOOOOOO
  18:59.6 + Calculate User BIN ... CE(0-0)
  18:59.6    - Bad Wl = 0,0
  18:59.6    - FW Spare = 32,41
  18:59.6    - Calculate capacity D1 : WL(Good/Bad) = 128 / 0
  18:59.6 + D1 Good Block(E=0,O=0,F=0)
  18:59.6 + F0: T24 special Mode = 00, Size = 0 MB
  18:59.6 ### Err: ZERO Capacity: 0 (MB)
  18:59.6 ### F0-Err:0074 ###
  18:59.6 [RESULT] ErrorCode : 0074
  18:59.6 + Static Summary: B=0   ,P=0   ,S=0   ,Others=0   ,D1B=0   ,D1P=0   ,D1S=0   ,D1Others=0   ,

 [ 2017-04-19 22:05:08 ]
 [ UPTool takes 00:18:59 ]
« Последнее редактирование: 19 Апреля 2017, 22:08:14 от Ден »