Автор Тема: Kingston DataTraveler 3.0 G4 8Gb SK6222 нужна прошивка.  (Прочитано 1604 раз)

xvily

  • Новичок
  • *
  • Сообщений: 1
Флешка греется и скорость в четыре раза ниже заявленной.Утилиты по параметрам(ниже) нет.ПОМОГИТЕ...

Volume: F:
Controller: SkyMedi SK6222
Possible Memory Chip(s):
  Toshiba TC58TEG6DDKTA00
Memory Type: MLC
Flash ID: 98DE9493 7650
Flash CE: 1
VID: 0951
PID: 1666
Manufacturer: Kingston
Product: DataTraveler 3.0
Query Vendor ID: KINGSTON
Query Product ID: DataTraveler 3.0
Query Product Revision: 1.01
Physical Disk Capacity: 7776239616 Bytes
Windows Disk Capacity:  7759429632 Bytes
Internal Tags: KL6R-S962
File System: FAT32
Relative Offset: 31 KB
USB Version: 3.00
Declared Power: 600 mA
ContMeas ID: 42C5-03-00
Microsoft Windows 7 SP1 x64 Build 7601
------------------------------------

« Последнее редактирование: 20 Января 2016, 02:17:33 от xvily »

Bryceipkl

  • Новичок
  • *
  • Сообщений: 1
Kingston DataTraveler 3 0 G4 8Gb SK6222 нужна прошивка
« Ответ #1 : 02 Октября 2017, 00:41:44 »
I have a Kingston DataTraveler Vault Privacy, 8 GB drive DTVP30/8GB that stopped working. I does not power up anymore. The blue LED never lights up.

I tried plugging it into multiple computers, no sign of life.

There does not seem to be any visual damage on the PCB.

Any suggestion to try and get it working again? Do these drives have a protection diode/fuse that I could remove or jump ?

Thanks.

MichaelSkype

  • Новичок
  • *
  • Сообщений: 4
Kingston DataTraveler 3 0 G4 8Gb SK6222 нужна прошивка
« Ответ #2 : 03 Октября 2017, 05:59:56 »
We got a case with Kingston SV300S37A/240G, when i checked it on PC3K i can see the SSD is shorting. unfortunately, the controller is SANDFORCE CL13824Z.

In theory, If i get a donor with the same controller and PCB, and ill solder all memory chips to the donor PCB with same controller, what are the chances that would work?

Does anyone came a cross with this issue?

Thanks