Здравствуйте, Гость

0 Пользователей и 2 Гостей просматривают эту тему.

2268 PRAM USB DEVICE
« : 20 Июля 2015, 21:27:14 »
I have just bought a Kingston Datatraveller SE9. It has Phison PS2251-68 chip controller.

I had worked as normal until I used Phison MPALL v3.70.0E. I think it caused TEST MODE.(So I cannot return it back.)
I cannot revert it. Because Phison MPALL v3.70.0E gives MODE 255 error.

UFD_Recover_Tool doesn't work due to wrong vendor id and product id.


Could you help me?


Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 50mA

USB Device ID: VID = 13FE PID = 3E00

Device Name: 2268 PRAM
Device Revision: 0110

Product Model: 2268 PRAM
Product Revision: 1.00

Chip Vendor: Phison
Chip Part-Number: PS2251-68(PS2268) - F/W 01.00.10 [2013-02-04]
Flash ID Code: 98DE9892 - Toshiba [TLC]
2268 PRAM USB DEVICE
« Ответ #1 : 04 Ноября 2016, 00:00:28 »
Can you please tell me where the value is stored what file name for the setting - USB device packet size in the "Custom USB device parameters" section.

thank you.
2268 PRAM USB DEVICE
« Ответ #2 : 15 Февраля 2017, 12:17:11 »
I could not get the ENTTEC unit working under Mavericks. Can anyone recommend an alternative USB DMX device?
2268 PRAM USB DEVICE
« Ответ #3 : 13 Сентября 2017, 14:31:00 »
When ever I try to plug my wheel into the PC it comes up with usb device not recognized.
2268 PRAM USB DEVICE
« Ответ #4 : 04 Марта 2018, 16:46:57 »
ProgDVB must work in near all DVB-T device.
try remove all modules.ebda files if you have some driver crash.
2268 PRAM USB DEVICE
« Ответ #5 : 14 Марта 2018, 05:47:02 »
I think what ever is missing is a small piece, I wonder what the message reference to "Writing default USB stick config file" is.
2268 PRAM USB DEVICE
« Ответ #6 : 15 Апреля 2018, 18:04:49 »
Our software relies on an USB base driver of Windows. If this driver can't communicate with this device, then our software can't do it too.
2268 PRAM USB DEVICE
« Ответ #7 : 07 Декабря 2018, 20:03:00 »
This suggests the USB is working, at least partly, so that the device can enumerate make its first communications with the computer OS.

What exactly happens when you try to do the update? How far does the progress bar get?