USB Flash Drive > Восстановление USB Flash Drive (общие вопросы)
Kingston DataTraveler100 16GB & SK6211
MoshPuiu:
I have a DataTraveler100 16GB with VID: 0951 PID:1607.
I tried to split it into 2 partitions of 8GB. I used all versions of SK6211 that I found here and I think every codebank version. I used 'flash selection': I29F64G08FAMC1 and I29F64G08FAMC1_4unit and ext interleave, disable, 2 way, 4 way...
None of the combinations worked... :(
Auto-LLF ends with 2 kinds of messages (depends on settings):
-CAPACITY ERROR;
-LLF2 ERROR.
Now, the flash drive shows 0 bytes capacity...
On the case of usb stick is printed:
DT100/16GB
04234-406.A00LF
CH 4025325 CHINA
Please, did anyone succeeded to format this kind of flash? Post a screenshot with the settings of SK6211 or at least give me which version of SK6211 are good, which version of codebank or if anyone knows some tricks on that thing...
Thank you very much and I'm sorry that I'm not a russian speaker...
sergeln:
What is written on memory chips without a label or sticker?
MoshPuiu:
I did not break the case to see exactly what is written on chips. I used some progs to identify the controller (SK6211-skymedi) and to see the VID&PID.....
I think this is the same model like in this link:
http://forum.ixbt.com/topic.cgi?id=27:9661:482
see reply Ramonak on middle of page. He has attached images!
I understand that SK6211_PDT_2008xxxx isolate the flash selection only to that models who match flash ID.
So, in the older version of prog apears only models I29F64G08FAMC1 and BK29F16B08HAMC1 and in 2009 appears another few. I tried all versions and nothing......
Digging in other chinese sites i found very few informations regarding DT100/16GB and it seems the flash used is I29F64G08FAMC1....
Anyway, tomorow I think I will break the case to see exactly what is written on chips; but I'm sure I will find the models like in images atached by Ramonak.
sergeln:
First - all information about all possible memory chips are in files "SK6211BA R-W Performance_Capacity List_20090123.xls" and "SK6211BAPC_Skymedi Flash Support List _20090123.xls" in the folder SK6211_20090227_BA \ Doc. If you really I29F64G08FAMC1, then check the file default.cfg section [TAGNAME_FLASH_PART_NUMBER], there shall be shown your memory - I29F64G08FAMC1, if not - correct.
Second setting: Chennel mode-single; External interleave - Disable; ExtInterleave in config - None.
I hope help.
MoshPuiu:
Thank you sergeln for your reply!
I already studied the xls documents. It seems that I29F64G08FAMC1 works 4way. Whatever, I tried all combinations disable, 2way, 4way, none works.
...and [TAGNAME_FLASH_PART_NUMBER] is actualized every time you save config file. In fact there are more options in default.cfg than you will see on interface window; do some test and notice that some parameters are automatically restored...
Still 0 bytes... :'(
Навигация
Перейти к полной версии