Поиск

[dimitrios]

Hello,

I have 2 identicall usb flash drives


One is showing the following info
chipgenius
description: [E:]ÓõóêåõÞ áðïèÞêåõóçò USB(Generic Flash Disk)
Device Type:        Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA

USB Device ID: VID = 058F PID = 6387
Serial Number: 4E2CE2A7

Device Vendor: Generic
Device Name: Mass Storage
Device Revision: 0102

Manufacturer: Generic
Product Model: Flash Disk
Product Revision: 8.07

Chip Vendor: Alcor Micro
Chip Part-Number: Unknown(??) - 0xE602 - F/W DA06
Flash ID Code: ECD598CE - Samsung - 1CE/Single Channel [TLC] -> Total Capacity = 2GB

Tools on web:       .

flash information extractor
Volume: E:
Controller: Alcor AU6989AN-G/AU6998AN-G/SC908AN-G
Possible Memory Chip(s):
  Samsung K9AAGD8U0A
Memory Type: TLC
Flash ID: ECD598CE 74C4
Flash CE: 1
Flash Channels: Single
Chip Code: 0xE602
Chip F/W: DA06
Group: 98
VID: 058F
PID: 6387
Manufacturer: Generic
Product: Mass Storage
Query Vendor ID: Generic
Query Product ID: Flash Disk     
Query Product Revision: 8.07
Physical Disk Capacity: 2055208960 Bytes
Windows Disk Capacity:  2053636096 Bytes
Internal Tags: AYWQ-U89S
File System: FAT
Relative Offset: 1272 KB
USB Version: 2.00
Max. Power: 200 mA
ContMeas ID: C15C-02-00
Microsoft Windows XP SP3
------------------------------------
...
Program Version: 7.4.0.473

When I try to format it I get error. I try to repair it using  AlcorMP_AU698x_RT_v1.0.0.14_L0117 as I read in this forum  but but I get error "get chip number fail". I am really new in the usb repair section...Any help ??

thanks
dimitris

[nat27]

Hello,
AlcorMP_AU698x_RT_v1.0.0.14_L0117 not support AU6989AN. For USB Flash Drive with this equipment recommend using

AlcorMP(121226.MD) - 5,1Mb. AU6989,90,98
AlcorMP(130205.MD) - 4,9Mb. AU6985,87,89,90,98

[dimitrios]

going now to check,,thanks !

[dimitrios]

30500: no support flash error
K9AAGD8S0A(tog) cap:1960M

..I do something wrong?

[nat27]

Oh, Samsung 21nm K9AAGD8U0A, TLC, 2096, 0xEC, 0xD5,098,0xCE,074,0xC4, CE=1
use
AlcorMP(130201.eD3) - 4,1Mb. + SAMSUNG 21n TLC

[nat27]

AlcorMP(120905.SEC)   - 3,6Mb SAMSUNG 21n TLC

[dimitrios]

you are great nat...yes its working!

[dimitrios]

I run cheepgenius and I get the following info
Description: [E:]ÓõóêåõÞ áðïèÞêåõóçò USB(Generic Flash Disk)
Device Type:        Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA

USB Device ID: VID = 0011 PID = 7788
Serial Number: D862AAE9

Device Vendor: Generic
Device Name: Mass Storage
Device Revision: 0101

Manufacturer: Generic
Product Model: Flash Disk
Product Revision: 8.00

Chip Vendor: Alcor Micro
Chip Part-Number: Unknown(??) - 0xE001 - F/W E643
Flash ID Code: 2C64444B - Micron - 1CE/Single Channel [MLC]
Reference Product: Ia?N?/EUAI?EAUECEO??UAI

Tools on web:       .

usbflashinfo does not recognize the flash

the usb is 8 gb in storage but trying to reflash it it seems I destroyed it.

any help?

[dimitrios]

I run chipgenius and I get the following info
Description: [H:]USB Mass Storage Device(Generic USB Flash Disk)

Protocal Version: USB 2.00
Current Speed: High Speed

USB Device ID: VID = 058F PID = 1234

Device Revision: 0001

Manufacturer: Generic
Product Model: USB Flash Disk
Product Revision: 7.76

Chip Vendor: Alcor Micro
Chip Part-Number: SC708(FC8708)/AU6987/AU6990 - F/W 85D1
Flash ID Code:??ADD7949A - Hynix - 1CE/Single Channel [MLC-8K] -> Total Capacity = 4GB

Tools on web:??.

I have already messed up this usb by trying to learn how to use alcor recovery tools. Can you tell me what tool I should used?

[nat27]

Check ICC AlcorMicro base recovered USB FlashDrive, the file ICCA_2013-08-07xls.rar to find the code controller e.g., 0xE001 = AU6998 (N), then FID.

0xE001, SC908\AU6998N, ~ AlcorMP(120817.eD3) \ AlcorMP_v1.0.0.14 \ AlcorMP(12хххх)

0xCA03, SC708(FC8708)/AU6987/AU6990, FID ADD7949A, ~ AlcorMP(120210.MD) \ AlcorMP_v1.0.0.14

To determine the flash equipment, in addition to ChipGenius desirable to use Flash Drive Infirmation Extractor ...

[dimitrios]

Thanks a lot for your info, thats exactly what i wanted, to learn the process but....

SC708(FC8708)/AU6987/AU6990 - F/W 8D91 is not Hynix H27UCG8U5ATR CE:2 MLC DUAL as the xls says but H27UBG8T2ATR

Volume: E:
Controller: Alcor AU6990/AU6987(HL)/SC708(FC8708)
Possible Memory Chip(s):
  Hynix H27UBG8T2ATR
Memory Type: MLC
Flash ID: ADD7949A 7442
Flash CE: 1
Flash Channels: Single
Chip Code: 0xCA03
Chip F/W: 8191
Group: 90
VID: 058F
PID: 1234
Manufacturer: Alcor Micro
Product: Mass Storage Device
Query Vendor ID: Generic
Query Product ID: USB Flash Disk 
Query Product Revision: 7.76
Physical Disk Capacity: 0 Bytes
Windows Disk Capacity:  0 Bytes
Internal Tags: AZWH-SAHS
USB Version: 2.00
Max. Power: 100 mA
ContMeas ID: C15C-05-00
Microsoft Windows XP SP3
------------------------------------
...
Program Version: 7.4.0.473

When I use AlcorMP(120210.MD) I get error   write initial bad block table error.Bad block: 0/1024(B), i am almost sure that the flash is not faulty since It went bad when i tried an alcor program
When I use AlcorMP(1.0.0.14)_L0130 I get ctl error. I tried to manually setup AU6987(HL) but I cannot find it in the vendor info.
and I have one more question the vid and pid shown I am sure are totally corrupted by my tries, I don't remember the first value when the flash was working. Does it matter and if so do I have to load first the driver and with what values since I don't remember the vid and pid.

A huge thanks for your explanations

[nat27]

USB Device ID: VID = 058F PID = 6387 is the default value for the controller ALCOR. It is always recommended to use them, except when used MPTool from the manufacturer, for example,
Transcend JetFlash USB Device ID: VID = 8564 PID = 1000.

The table xls ICC Alcor Micro are reversals of USB Flash Drive with a particular hardware controller (Chip Code) and memory (Flash ID). By Chip Code selected year MPTool, for example AlcorMP (10xxxx) \ (13xxxx), and in Flash ID specialty tools, such as, 16k \ eD3 \ Samsung 21n, etc.

error write initial bad block table error.Bad block: 0/1024 (B) happens when there is no *.bin-files in the utility, you need to take a different version of the utility. Sometimes it is necessary to review all the possible versions of the utilities.

Links to MPTool for UFD controllers Alcor
http://www.flashboot.ru/forum/index.php?topic=1293.0
http://www.usbdev.ru/files/alcor/

[dimitrios]

wow..so many information..i really got lost and no matter how many times I tried still no luck, I will keep on!!
again a big thanks!!