Здравствуйте, Гость

0 Пользователей и 1 Гость просматривают эту тему.

AU6989SN-GT/AU6998SN [EC05] - F/W FF00 SanDisk SDTNQFAMA-004G
« : 05 Декабря 2015, 19:12:37 »
Hi,

I hope it is no problem to write in english.




ChipGenius_v4_00_1024_0047 says :



Description: [K:]USB-Massenspeichergerät
Device Type:  Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA

USB Device ID: VID = 058F PID = 6387
Serial Number: 15050723001010

Device Revision: 0105

Product Revision: 8.07

Controller Vendor: Alcor Micro
Controller Part-Number: AU6989SN-GT/AU6998SN [EC05] - F/W FF00
Flash ID code:      45D78493 - SanDisk SDTNQFAMA-004G - 1CE/Single Channel [MLC-16K] -> Total Capacity = 4GB

Tools on web: .


Possible Flash Part-Number
----------------------------
[1CE]SDTNQFAMA-004G x 1 pcs/Channel x 1 Channel


Flash ID mapping table
----------------------------
[Channel 0]   [Channel 1]
45D784937257   --------
--------   --------
--------   --------
--------   --------
--------   --------
--------   --------
--------   --------
--------   --------



I found out that I shall try AlcorMP(130201.eD3) and/or AlcorMP(121214.eD3) but Im not 100% sure and these tools only give a :

"Hub Configuration Changed. removal of all devices!
whether restart the prdoction process?"

I can start the tool but It wont show anything.

What did I miss, what did I do wrong ?

Or is this Alcor Chip not supported ?

Thanks in advance for any reply :)

Оффлайн nat27

*
  • *****
  • 2854
Re: AU6989SN-GT/AU6998SN [EC05] - F/W FF00 SanDisk SDTNQFAMA-004G
« Ответ #1 : 05 Декабря 2015, 23:23:30 »
Hello! These tools should help

AlcorMP(140912.MD) - 6,9Mb. AU6998
AlcorMP(150915.MD) - 7,2Mb. AU6989SN-GT/GTA/GTB 89SNL-B 89SNL
AlcorMP(150916.MD) - 7,0Mb. 89SN DGD_BIN_OLD

Support controllers alcor code EC05 begins in the AlcorMP(14.02.14.MD) and newer versions.
« Последнее редактирование: 06 Декабря 2015, 08:45:49 от nat27 »
Re: AU6989SN-GT/AU6998SN [EC05] - F/W FF00 SanDisk SDTNQFAMA-004G
« Ответ #2 : 06 Декабря 2015, 14:17:32 »
Hello and thank you for the information.

All 3 versions give me a "create process failed".

Using XP SP3 compatibility mode and starting as admin works.
Is it "safe" to use XP SP3 compatibility mode ?

Before Low Level Format using AlcorMP(140912.MD)

K:
SDTNQFAMA-004G Cap: 3810.0M
ID:45,D7,84,93,72,57 CE:1 (Block)    C




After low level format it :

Time: 00:13:00 Cap: 4068.0M[No Tog]
BB: 15/1060 SN: DEF4BFCA (Block)


SDTNQFAMA-004G Cap: 4068.0M
ID:45,D7,84,93,72,57 CE:1 (Block)




So, where would be the "Enable CD-Rom"  tool now ? :)
« Последнее редактирование: 06 Декабря 2015, 15:43:27 от itsmemario »

Оффлайн nat27

*
  • *****
  • 2854
Re: AU6989SN-GT/AU6998SN [EC05] - F/W FF00 SanDisk SDTNQFAMA-004G
« Ответ #3 : 06 Декабря 2015, 15:51:02 »
What do you want to do with USB FlashDrive? restore operation ? or create a CDROM/autorun

To create a CDROM of use AlcorMP.exe \Setup\Mode\AutoRun and specify the path to the image,for example, D:\Win10PE(x86x64_Eng).iso
Re: AU6989SN-GT/AU6998SN [EC05] - F/W FF00 SanDisk SDTNQFAMA-004G
« Ответ #4 : 06 Декабря 2015, 17:02:46 »
Hi,

and thank you, I understand but :

When I restarted my computer, USB-keyboard and USB-mouse no longer work.
They work in BIOS and before windows, but "turn off" when windows starts.

The LED light attached to the USB-keyboard still shines as a light of hope. ^^

USB-mouse&keyboard wont be recogniozed on any USB port. Nothing happens. Only the USB-Stick I formated with the tool is recognized and can be accessed without problems.

I use a PS2 keyboard now.

What might have gone wrong here ? :)


p.s.
Device Manage said, driver for USB could not be started (ICH Chipset), only the hub itself and and USB port with the USB Stick had NO yellow exclamation mark.

I re-installedt the ICH chipset and now everything is OK again. USB Stick also working.

How could this happen ? What did the tool try to do ?
« Последнее редактирование: 06 Декабря 2015, 17:32:42 от itsmemario »

Оффлайн nat27

*
  • *****
  • 2854
Re: AU6989SN-GT/AU6998SN [EC05] - F/W FF00 SanDisk SDTNQFAMA-004G
« Ответ #5 : 06 Декабря 2015, 18:28:32 »
Start AlcorMP(140912.MD)\DRIVERS\LoadDriver.exe and restart the computer , USB devices will work correctly.

or delete the LowerFilters in the registry

 (WinXP)  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\
{36FC9E60-C465-11CF-8056-444553540000}

(Win_7)    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\
{36FC9E60-C465-11CF-8056-444553540000}


For devices connected to the USB does not fall off , the file AlcorMP.ini should contain
[BadBlock]
LoadDriver=1
« Последнее редактирование: 06 Декабря 2015, 18:33:04 от nat27 »