Здравствуйте, Гость

0 Пользователей и 1 Гость просматривают эту тему.

plz help in my usb flash
« : 09 Февраля 2015, 13:29:07 »
plz i need help to fine the software the is a Kingston usb 64gb

-------------------------------------------
Description: [M:]USB Mass Storage Device(Kingston DT microDuo 3.0)
Device Type:  Mass Storage Device

Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
Current Speed: High Speed
Max Current: 300mA

USB Device ID: VID = 0951 PID = 16A3
Serial Number: 6CF049E3311BBE61A9010309

Device Vendor: Kingston
Device Name: DT microDuo 3.0
Device Revision: 0100

Manufacturer: Kingston
Product Model: DT microDuo 3.0
Product Revision: PMAP

Controller Vendor: Phison
Controller Part-Number: PS2251-07(PS2307) - F/W 01.03.53 [2014-06-10]
Flash ID code: 983A9992 - Toshiba [TLC]

Tools on web: http://dl.mydigit.net/special/up/phison.html
Re: plz help in my usb flash
« Ответ #1 : 11 Июня 2019, 07:11:26 »
same story, help plz

USB Device ID: VID = 0951 PID = 16A3
Serial Number: 001731F27C3CB060B980742F

Device Vendor: Kingston
Device Name: DT microDuo 3.0
Device Revision: 0100

Manufacturer: Kingston
Product Model: DT microDuo 3.0
Product Revision: PMAP

Controller Vendor: Phison
Controller Part-Number: PS2251-07(PS2307) - F/W 05.00.50 [2016-01-14]
Flash ID code:      AD3A18A36125 - Hynix H27UDG8M2MTR [TLC-16K]
Re: plz help in my usb flash
« Ответ #2 : 11 Июня 2019, 07:44:03 »
Help for me!  :D
1. Download "Phison Format & Restore" http://www.usbdev.ru/files/phison/phisonrestore/ (tested on 3.23 version) ONLY 3.23!
2. Plug in flash drive, open programm, click "Restore" again "Restore", confirm "Yes", wait for error message "Restore fail...". Click "Оk" - close programm.
3. Plug out flash drive and then plug in.
4. Windows will show up the message about unformatted disk, format it, should be ok.