Здравствуйте, Гость

0 Пользователей и 1 Гость просматривают эту тему.

Fake Kingston DataTraveler DT101 - FC8908
« : 29 Марта 2013, 14:12:32 »
ENGLISH

hello  (sorry i only speak english using google translatefor talking now )

i got a Kingston Data Traveller 101 32GB assembled in china.
the flasdisk cannot be formatted, because write protected. i open the USB flash drive, and memory card soldered to the board. ic controller FC8908  H2N604-10F  1126TA1

when i used "UsbDeviev":  vid 0011     pid 7788     serial number: ECB8B02D        Chip Vendor: Alcor                                  Chip Part-Number: f8308 (not FC8908)      product vendor:(N/A)   product Model: U

so i downloaded this tool:
AlcorMP_AU69xx_120210_MD
AlcorMP(101216.MD)
Alcormp(110726)

it detected my flash , and clicked on the start    , then there was the error message: 30D00:    BadBlock:0/4096
Can my flashdisk be Repaired? How to repair?
thanks in advance for any help
« Последнее редактирование: 30 Марта 2013, 02:41:17 от Anatolij »

Оффлайн nat27

*
  • *****
  • 2854
Re: Fake Kingston DataTraveler DT101 - FC8908
« Ответ #1 : 30 Марта 2013, 10:54:20 »
----------ENGLISH--------
Hi!
You must complete the information
 
2. Application report Flash Drive Information Extractor or chipgenius on your flash drive.
4. If the flash drive opened . Name of the memory chips
7. The computer operating system, in which you run the utility.

----------RUS--------
Привет!
Необходимо заполнить информацию
 
2. Отчет программы Flash Drive Information Extractor о Вашей флэшке.
4. Если флешка вскрыта. Название микросхемы памяти
7. Операционная система компьютера, в которой Вы запускаете утилиты.