Здравствуйте, Гость

0 Пользователей и 1 Гость просматривают эту тему.

cbm2098e problem
« : 23 Июня 2014, 11:47:41 »
Hi everyone!

I'm trying to recover a fake 32gb pendrive to its original state. HL tool measured it to 4gb. Chipgenius (4.00.0028 stable) given the report above. I opened the case, and the driver chip is realy the cb2098E, on the memory chip is only M22K7610AH (i found nothing with google about it). I have tried the umptools 6002 to 6007. The erliers didn't recognize the drive. 6005 and above recognized, but the repair allways finishing with some error, 6007 also kills windows on the pc :). The only result is the drive became unuseable. Windows can regonize it, but unable to create any partition on it. I would like to get it in working condition on any size. Is there anything i can try?

Thanks for any help!


Chipgenius report before modifiyng:

Description: [E:]USB háttértár(General UDisk)
Device Type:  Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA

USB Device ID: VID = ABCD PID = 1234
Serial Number: 1402101422021488440604

Device Vendor: General
Device Name: UDisk
Device Revision: 0100

Manufacturer: General
Product Model: UDisk
Product Revision: 5.00

Controller Vendor: ChipsBank
Controller Part-Number: CBM2098 - 064F - [2013-06-06]
Flash ID code:      ADDE94EB - Hynix - 1CE/Single Channel [MLC] -> Total Capacity = 8GB

Tools on web: http://dl.mydigit.net/special/up/chipsbank.html


Possible Flash Part-Number
----------------------------
Unknown


Flash ID mapping table
----------------------------
[Channel 0]   [Channel 1]
ADDE94EB7444   --------