Форум - FlashBoot.ru
For English speaking users => Recovery USB Flash Drive => Тема начата: 30na от 21 Октября 2010, 13:19:16
-
Hi, i have a transcend flash model: HV70/8G ,chip's name is SPANSION
how repair it??????????
thanks
-
SPANSION - is a Flash memory chip (http://www.spansion.com/).
What about controller?
Online Recovery Tool (http://www.transcendrussia.ru/Products/online_recovery_1.asp)
-
hi
thanks for your reply
but, this program not detect my flash.
in first my flash vid:3822 and pid:590C
i use Phison_UP8-R_Format for this flash, the format not completed and flash vid,pid is changed
new vid:12E3 and pid:0712
how i can restor orginal vid and pid?
please help me
and excuse me for my poor english.
-
VID / PID is part of the firmware. Change can be in the firmware. If the controller Phison a utility to its firmware does not allow you to change the VID / PID, and only correct from the standard.
This does not affect the efficiency of the device.
You better open flash case and say labeling the controller (like PS2233 or UP8).
-
chip name is Spansion
have a this code: AL016M90BA101
vid and pid change by Phison_UP8-R_Format
now, not detected by Alcor Program
-
3. Name of the controller (bottom left chip with 48-pin on all sides)
4. Name of the memory chips. (48-pin to-side) / / HY27UF161G2M (If there is a sticker, then we write that under the sticker!)
(http://sg-sg.chat.ru/UT161-T6.JPG)
Сontroller name is important to select tools!
ps:
Utilities "PHISON" suitable for controllers "PHISON ****" and" UP ** "
Utilities "ALCOR" NOT suitable for controllers "PHISON ****" and" UP ** "