Форум - FlashBoot.ru

Hey guys,
here is my story :
I recently bought a Freecom Databar USB stick and I wanted to customize it and to have an autorun. So I dismantled it, found the Phison chip and downloaded the last MPALL (v.3.20) and after some testing I've added a CDFS partition with an autorun.inf and a test program like a hello world.

I was quite happy of the result and wanted to change the ISO on the partition but MPALL doesn't recognises my stick anymore.

Here is a screenshot of MPALL and a strange detection in the slot 3.


Some technical informations :
My stick before any modifications.


and after :


I run on windows 7 x32.

As variant: format stick and try MPALL again.

thanks novo,
so I tried several times the Phison formatter (v2.10.0.2) on my computer and on another one running windows XP. It says that it doesn't support "this IC".
The only thing I can do is to wait for an update to have my chip supported.

Bob, you write "I dismantled it", then you can tell exactly what's the IC.
PS2251-60 as GetInfo said?
And show content of MP.ini file please.

It's written PS2251-60-5 on the chip.
Is it that "-5" that stuck the formatter ?

Here is the content of MP.ini :
[PenDriveMP]
IC Type=PS2251-60
[Parameter Mark]
Parameter Type=F1_MP_21
[Customize Info]
USB VID=0x13FE
USB PID=0x3D00
String Product Name=USB DISK 2.0
Inquiry Version=PMAP
[Configuration]
Reset Serial Number=0
[TestItemOption]
Do Preformat Test=1
[Extra]
Mode=3
[Misc]
Volume Label=USB DISK
[Advance]
Tick=1
FC1=0xff
FC2=0x01
[Firmware]
ISP=0

may be -5.  mp. ini all right
try other formatter. there many