Форум - FlashBoot.ru
For English speaking users => Recovery USB Flash Drive => Тема начата: ByronP от 24 Июня 2014, 17:43:36
-
After weeks of trying all I have done is trashed a bunch of drives. What I need to do is set the drive to be a hard disk or cd rom so I can use autorun and also set the proper capacity which clicks up as 8gb but the drives are set at 1gb.
I have to modify a bunch of drives this way and am willing to pay for help. Here is what I get on ChipGenius about the drives.
Description: [H:]USB Mass Storage Device(USB MEMORY BAR)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 090C PID = 3000
Device Vendor: Silicon Motion,Inc.
Device Name: SM3255AA MEMORY BAR
Device Revision: 0100
Product Model: USB MEMORY BAR
Product Revision: 1000
Controller Vendor: SMI
Controller Part-Number: SM3257ENAA - ISP NONE
Flash ID code: 98DE9892 - Toshiba - 1CE/Single Channel [TLC] -> Total Capacity = 8GB
Tools on web: http://dl.mydigit.net/special/up/smi.html
-
Well I keep trying and now I am getting "Bad Block over setting (11) (User-956(M) > FW-0 (M)) which I am assuming is beacuse for some reason it thinks the capacity is 0 :-(
-
BTW: Willing to pay for someone to TeamView in and help me.