Здравствуйте, Гость

0 Пользователей и 1 Гость просматривают эту тему.

Hp Usb 8GB , Alcor Controller AU6989SN/AU6989ANL
« : 08 Ноября 2014, 17:03:35 »
What Tool I use For this Usb???  ???
Description: [K:]USB Mass Storage Device(Generic USB Flash Disk)
Device Type:  Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA

USB Device ID: VID = 058F PID = 1234

Device Vendor: Alcor Micro
Device Name: Mass Storage Device
Device Revision: 0001

Manufacturer: Generic
Product Model: USB Flash Disk
Product Revision: 7.76

Controller Vendor: Alcor Micro
Controller Part-Number: AU6989SN/AU6989ANL - F/W 0083
Flash ID code:      ADDE94DA - Hynix H27UCG8T2ATR - 1CE/Single Channel [MLC-8K] -> Total Capacity = 8GB

Tools on web: .


Possible Flash Part-Number
----------------------------
[1CE]H27UCG8T2ATR x 1 pcs/Channel x 1 Channel


Flash ID mapping table
----------------------------
[Channel 0]   [Channel 1]
ADDE94DA74C4   --------
--------   --------
--------   --------
--------   --------
« Последнее редактирование: 09 Ноября 2014, 12:53:09 от FurqanHanif »
Re: Hp Usb 8GB , Alcor Controller AU6989SN/AU6989ANL
« Ответ #1 : 10 Ноября 2014, 12:33:05 »
Please Someone Help ....  :(  :(

Оффлайн nat27

*
  • *****
  • 2854
Re: Hp Usb 8GB , Alcor Controller AU6989SN/AU6989ANL
« Ответ #2 : 10 Ноября 2014, 13:20:07 »
Hi!!!

ADDE94DA - Hynix H27UCG8T2ATR is 20nm 8Kpage.
Should help AlcorMP\FCMPTool with firmware CTL10\DGD_BIN\10_8K_UCG20_xx.BIN
Must take into account the controller code. May suit AlcorMP(121029), AlcorMP(121102), AlcorMP(121226),

Use WinXP, undesirable win7\8 x64.






Re: Hp Usb 8GB , Alcor Controller AU6989SN/AU6989ANL
« Ответ #3 : 10 Ноября 2014, 14:20:18 »
No FCMP Tool Detecting My USb..  :-\
OK So , i Tried AlcorMP Tool and It detected my USb but it Giving me "Bad Block Error " or Flash Disk Parameters Error" So i Mess With Alcor MP Settings , change these Settings and it USB formated Successfully but When i Write My DATA on My USB , Some of data is Got Currupted so i Tested my USB with Flash Drive Tester and it Shows me Many COmparison Error " Error in Data at LBN" , it Looks Like USB not Formated or it's Space Not Sorted Correctly , Please Help...  :(

Оффлайн nat27

*
  • *****
  • 2854
Re: Hp Usb 8GB , Alcor Controller AU6989SN/AU6989ANL
« Ответ #4 : 10 Ноября 2014, 14:45:51 »
Can this flash drive defective. Or the controller needs to be reset. New good flash drive 8GB is cheap.

http://flashboot.ru/forum/index.php?topic=25161.0 - This topic is similar to your memory stick. Utility ALCOR MP_v14.08.12.00 worked correctly. If your flash drive does not help ALCOR MP_v14.08.12.00 it is not the fault of the utility.
« Последнее редактирование: 10 Ноября 2014, 15:02:28 от nat27 »
Re: Hp Usb 8GB , Alcor Controller AU6989SN/AU6989ANL
« Ответ #5 : 10 Ноября 2014, 19:22:28 »
But all 8GB is usable when it Got Write Protected , So i Think USB is Good..  :-\
And What Settings You recommend For AlcorMP Tool??? 
i Tried the Below Settings and it give me "Too Many BAd Block Error"..
http://i.imgur.com/MGtqBQv.png
« Последнее редактирование: 10 Ноября 2014, 19:46:14 от FurqanHanif »
Re: Hp Usb 8GB , Alcor Controller AU6989SN/AU6989ANL
« Ответ #6 : 10 Ноября 2014, 19:45:17 »
But all 8GB is usable when it Got Write Protected , So i Think USB is Good..  :-\
And What Settings You recommend For AlcorMP Tool??? 
i Tried the Below Settings and it give me "Too Many BAd Block Error"..
http://i.imgur.com/MGtqBQv.png

Оффлайн nat27

*
  • *****
  • 2854
Re: Hp Usb 8GB , Alcor Controller AU6989SN/AU6989ANL
« Ответ #7 : 10 Ноября 2014, 21:18:54 »
Likely to have serious problems with the flash drive or the equipment(may be controller) is not working properly. Otherwise, most of the utilities ALCOR MP normally handled flash drive. In a previous post I showed that the normal flash drives with similar equipment are no problems with recovery ALCOR MP_v14.08.12.00.

My opinion is that the flash drive is faulty. Any service utilities can not fix hardware errors.

??? Can the controller needs to be reset...
« Последнее редактирование: 10 Ноября 2014, 21:30:13 от nat27 »
Re: Hp Usb 8GB , Alcor Controller AU6989SN/AU6989ANL
« Ответ #8 : 11 Ноября 2014, 06:18:45 »
OK So, i Have Tried Some Different Settings and Format , Format Successful But Now Me Flash Space is 15GB , So i Again Change Some Settings Like i Change the Scan Level from Fast Scan to Full Scan 1 and ECC to 15 to 7 , so now myFlash Space is becaome 6GB and all GB is usable and Working fine. So now how i get my Actual Flash Drive Whole Space and Make it Usable?? Looks like it Something To Do with Scan Level Settings...  ???
And How To Reset a Controller??

Оффлайн nat27

*
  • *****
  • 2854
Re: Hp Usb 8GB , Alcor Controller AU6989SN/AU6989ANL
« Ответ #9 : 11 Ноября 2014, 06:39:39 »
6GB for a flash drive is very good. If it works then we can stop.
reset controller
http://flashboot.ru/flash_recovery/2012/11/04/usb-test-pin.html
Re: Hp Usb 8GB , Alcor Controller AU6989SN/AU6989ANL
« Ответ #10 : 11 Ноября 2014, 11:09:06 »
Hmmm So it Means i can Only Get 6GB , Their is no Way To get Actual 8GB Space?? Right??

Оффлайн nat27

*
  • *****
  • 2854
Re: Hp Usb 8GB , Alcor Controller AU6989SN/AU6989ANL
« Ответ #11 : 11 Ноября 2014, 18:47:36 »
the flash drive is a mystery.
utilities AlcorMP also.
Re: Hp Usb 8GB , Alcor Controller AU6989SN/AU6989ANL
« Ответ #12 : 11 Ноября 2014, 19:18:48 »
Hmmm OK ...  i Like Playing with Mysteries ..  ;D  :P
Thanks for The Help...  :)