Форум - FlashBoot.ru

Hi,

I need help with my 32GB USB-Stick.

Controller Chip: FC8508
Flash chip: AT072011-SMI-3

Description on the PCB:
YAHO-20090402
KWPT_KQAU698x OTX

I can not find any information of that ram chip on the internet, any help on this is welcome!!!
The only thing i now is that this chip is produced in 3 types:
1. AT072011-SMI-1 = ? (i suppose it's the timings)
2. AT072011-SMI-3  (this is the one i got)
3. AT072011-SMI-6 = ? (i suppose it's the timings)

The problem i have is that when i put the stick in a usb slot Windows wil recognise it and install (Generic USB Flash Disk USB Device).
USBSTOR\DISK&VEN_GENERIC&PROD_USB_FLASH_DISK&REV_7.76\7&33A5942F&0

When i try to access the stick windows reports: Please insert disk into drive
Windows assings a driver letter to it but it is not possible to access.

Can anyone help me Please?

All information is welcome!

Best regards,
Vaako

FC MpTool FC8308 FC8508 FC8406 v03.00.02
- Check Flash ID (FID)
- Find memory "name" by FlashList.ini

FC MpTool FC8308 FC8508 FC8406 v03.00.02
- Check Flash ID (FID)
- Find memory "name" by FlashList.ini

Hi Andy,

I can not find any file called FlashList.ini the only .ini i can find is FC MpTool.ini
Where do i suppost to find the FlashList.ini file?

The only thing i now about the Flash chip that it is: AT072011-SMI-3 i dont now the brand name.
The chip is a TSOP-48, and these pins are not connected to the PCB: 3, 24, 25, 26, 45, 46, 47.
Is there a way to determine the Flash chip brand name?



Any help is welcome!!!

Regards,
Vaako

Hi, Vaako.
FC_MpTool_FC8308_FC8406_v.2.02.00 flashlist.ini attached bellow

Memory(TSOP1) datasheet to check unused pins.


FID- ?

ID: 0xEC....

0x98,0xD5,0x94,0x32 => TC58NVG4D2ETA00 (2GB, not 32GB).