hello for all people's
Can you helo me ?
I have a problem for flash my key memory usb corrupt.
I need find right tool firmware chip and datasheet of alcor hynix chip H26M6400200R, i have found other number on chip , but i don't know how to go at next steps. Can you post me a guide for repair my key ?
Have you need of more info details ?
post here my info chip extract log..
sorry i have write you here in english base school
Volume: R:
Controller: Alcor AU6989AN-G/AU6998AN-G/SC908AN
Possible Memory Chip(s): Not available
Flash ID: ADDE94DA 74C4
Flash CE: 4
Flash Channels: Single
Chip Code: 0xE603
Chip F/W: FF00
Group: 98
VID: 058F
PID: 6387
Manufacturer: Generic
Product: Mass Storage
Query Vendor ID: Generic
Query Product ID: Flash Disk
Query Product Revision: 8.07
Physical Disk Capacity: 34626076672 Bytes
Windows Disk Capacity: 34624155648 Bytes
Internal Tags: AYWR-S892
File System: NTFS
Relative Offset: 1872 KB
USB Version: 2.00
Declared Power: 200 mA
ContMeas ID: F9B8-01-00
Microsoft Windows 7 SP1 x64
------------------------------------
...
Program Version: 8.0.0.550
AlcorMP(130609.MD) (http://yadi.sk/d/ioC2aBk78MsZp) - 4,3Mb. AU6998, 8Kpage_L84, 16Kpage_L85, Hynix20n 8\16Kpage, Toshiba24n
AlcorMP(140812.MD) (https://yadi.sk/d/eeM11z5fapUDs) - 6,4Mb. AU6998
thanks NAT27, and marry Christmas and happy new year,,,
With 140812MD I have solved partially, because now system win 7 recognized pendrive same removible disk but impossible format , info tool pendrive view it same mass storage... firmware tool work fine another error.. Why it's look same removible disk ? I need that it to be see same MASS storage... I post here a picture info pen drive...
Use the setup utility by default.
FlashType
ScanMode: Low Level Format
ScanLevel: FullScan4 or FullScan3,2,1
ECC:1 or other(2,3,4...12..15)
Mode
PureDisk - Removible
FixedDisk - HDD type
I have try format my pendrive same you have write, but always it recognized same removible .When I try to format it return a message, "insert a disk and retry"
after i have check info alcor firmware and this return here : changed pid port
Hi,
it looks like the chip to be programmed is not powered. So all bits are
read as 1 through pullupresistors. Can you check this?
guidob