Hi,
I hope it is no problem to write in english.
ChipGenius_v4_00_1024_0047 says :
Description: [K:]USB-Massenspeichergerät
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 058F PID = 6387
Serial Number: 15050723001010
Device Revision: 0105
Product Revision: 8.07
Controller Vendor: Alcor Micro
Controller Part-Number: AU6989SN-GT/AU6998SN [EC05] - F/W FF00
Flash ID code: 45D78493 - SanDisk SDTNQFAMA-004G - 1CE/Single Channel [MLC-16K] -> Total Capacity = 4GB
Tools on web: .
Possible Flash Part-Number
----------------------------
[1CE]SDTNQFAMA-004G x 1 pcs/Channel x 1 Channel
Flash ID mapping table
----------------------------
[Channel 0] [Channel 1]
45D784937257 --------
-------- --------
-------- --------
-------- --------
-------- --------
-------- --------
-------- --------
-------- --------
I found out that I shall try AlcorMP(130201.eD3) and/or AlcorMP(121214.eD3) but Im not 100% sure and these tools only give a :
"Hub Configuration Changed. removal of all devices!
whether restart the prdoction process?"
I can start the tool but It wont show anything.
What did I miss, what did I do wrong ?
Or is this Alcor Chip not supported ?
Thanks in advance for any reply :)
Hello! These tools should help
AlcorMP(140912.MD) (https://yadi.sk/d/drkEAZDkeGRin) - 6,9Mb. AU6998
AlcorMP(150915.MD) (https://yadi.sk/d/0FIar5p6kk2nf) - 7,2Mb. AU6989SN-GT/GTA/GTB 89SNL-B 89SNL
AlcorMP(150916.MD) (https://yadi.sk/d/HVvl6rHzktpvd) - 7,0Mb. 89SN DGD_BIN_OLD
Support controllers alcor code EC05 begins in the AlcorMP(14.02.14.MD) and newer versions.
Hello and thank you for the information.
All 3 versions give me a "create process failed".
Using XP SP3 compatibility mode and starting as admin works.
Is it "safe" to use XP SP3 compatibility mode ?
Before Low Level Format using AlcorMP(140912.MD)
K:
SDTNQFAMA-004G Cap: 3810.0M
ID:45,D7,84,93,72,57 CE:1 (Block) C
After low level format it :
Time: 00:13:00 Cap: 4068.0M[No Tog]
BB: 15/1060 SN: DEF4BFCA (Block)
SDTNQFAMA-004G Cap: 4068.0M
ID:45,D7,84,93,72,57 CE:1 (Block)
So, where would be the "Enable CD-Rom" tool now ? :)
What do you want to do with USB FlashDrive? restore operation ? or create a CDROM/autorun
To create a CDROM of use AlcorMP.exe \Setup\Mode\AutoRun and specify the path to the image,for example, D:\Win10PE(x86x64_Eng).iso
Hi,
and thank you, I understand but :
When I restarted my computer, USB-keyboard and USB-mouse no longer work.
They work in BIOS and before windows, but "turn off" when windows starts.
The LED light attached to the USB-keyboard still shines as a light of hope. ^^
USB-mouse&keyboard wont be recogniozed on any USB port. Nothing happens. Only the USB-Stick I formated with the tool is recognized and can be accessed without problems.
I use a PS2 keyboard now.
What might have gone wrong here ? :)
p.s.
Device Manage said, driver for USB could not be started (ICH Chipset), only the hub itself and and USB port with the USB Stick had NO yellow exclamation mark.
I re-installedt the ICH chipset and now everything is OK again. USB Stick also working.
How could this happen ? What did the tool try to do ?
Start AlcorMP(140912.MD)\DRIVERS\LoadDriver.exe and restart the computer , USB devices will work correctly.
or delete the LowerFilters in the registry
(WinXP) HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\
{36FC9E60-C465-11CF-8056-444553540000}
(Win_7) HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\
{36FC9E60-C465-11CF-8056-444553540000}
For devices connected to the USB does not fall off , the file AlcorMP.ini should contain
[BadBlock]
LoadDriver=1