hi every one
i have aproblem with my flash(8 giga kingstone)
i will post it in pic
(http://i45.tinypic.com/4t4xns.jpg)
this is my flash
(http://i50.tinypic.com/xm4gmp.jpg)
SK6211
BAPC
00824
H31088
-----
29F32G08CAMCI
083415
MC'06 B3
LZHJ
(http://i50.tinypic.com/1z2ftkm.jpg)
(http://i49.tinypic.com/2wpnm9j.jpg)
and this is the problems
i used all software pro but didn't help
(http://i49.tinypic.com/54fy4y.jpg)
ver 2010
(http://i50.tinypic.com/fp5slc.jpg)
ver 2009
(http://i46.tinypic.com/14bhiww.jpg)
and tis is the resalut
finally i used this
(http://i26.tinypic.com/28wjc3p.jpg)
ver 2008
and it's result is
(http://i32.tinypic.com/292bi40.jpg)
and this is the advanced i used in auto-LLF
(http://i27.tinypic.com/2wn90mr.jpg)
and this is the
chip ginuse read and the ver2008
Device Name: ?[N:]?USB Mass Storage Device(SKYMEDI USB Drive USB Device)
PnP Device ID: VID = 1516 PID = 8628
Serial Number: 02
Revision:
Device Type: Standard USB device - USB2.0 Full-Speed (USB1.1)
Chip Vendor: skymedi(??)
Chip Part-Number: SK6201~SK6281
Product Vendor: SKYMEDI
Product Model: USB Drive
------
Controller Version: SK6203
Flash Part No.: I29F32G08CAMC1_ENHANCE
Total Flash Size: 8192 MB
4K Page, MLC
Flash ID 1: 0x89 0xD5 0x94 0x3E 0x74
Flash ID 2: 0x00 0x00 0x00 0x00 0x00
Flash ID 3: 0x89 0xD5 0x94 0x3E 0x74
Flash ID 4: 0x00 0x00 0x00 0x00 0x00
Flash ID 5: 0x89 0xD5 0x94 0x3E 0x74
Flash ID 6: 0x00 0x00 0x00 0x00 0x00
Flash ID 7: 0x89 0xD5 0x94 0x3E 0x74
Flash ID 8: 0x00 0x00 0x00 0x00 0x00
Part name: I29F32G08CAMC1_ENHANCE
CodeBank: C080327A_F080327A
CodeSwap: 03 20
Production date and time: Mon Sep 22 04:31:44 2008
Config Name: 9904234-372.A00LF
PDT Version: SK6211_PDT_20080731_BA
VID: 45 A7
PID: 94 C7
Vendor Name: ݤ
Product Name: ¡œqv‡ÃßÙÝ'N&Eacut e;μí
Revision: !
í
Serial Number: Z#½¦©·(ѬÚÀoÕÆ õ/ö¨MŠP)¡œqv‡ÃßÙ&Yacu te;'NÉμíZJñÏ¥UV§ EÇ"›§
External Interleave: 4 Way
Channel: Byte Mode
Max Current: 474 mA
Real Density: (0 MB)
Error Code: 156 113
------
what is the problem?
how can i solve it?? ???
ЦитироватьController Version: SK6203
It means, that part of the controller is dead, or your OS is not WinXP, or microprogram in the controller is down.
1. for utils u need WinXP/2000
2. restart microcode (http://translate.google.ru/translate?js=y&prev=_t&hl=ru&ie=UTF-8&layout=1&eotf=1&u=http%3A%2F%2Fwww.flashboot.ru%2Findex.php%3Fname%3DNews%26op%3Darticle%26sid%3D24&sl=ru&tl=en)
3. manual (http://translate.google.ru/translate?hl=ru&sl=ru&tl=en&u=http%3A%2F%2Fwww.flashboot.ru%2Findex.php%3Fname%3DNews%26op%3Darticle%26sid%3D31)
4. in
SK6211_PDT_20090828, use
I29F32G08CAMC1.cfg...sorry fo my english
ЦитироватьIt means, that part of the controller is dead, or your OS is not WinXP, or microprogram in the controller is down
i'm using win xp Sp3
what is that mean ,it willn't be work for the controller
thanks andy,it's okhy,please tell me what can i do ???
47 - [PREFMT_ERR_SYS_WB_MODE_ERR]
(http://i26.tinypic.com/28wjc3p.jpg)
what is error mean??
this the result for
SK6211_PDT_20090828, use I29F32G08CAMC1.cfg
(http://i27.tinypic.com/1y955z.jpg)
(http://i32.tinypic.com/33a777q.jpg)
1. Try to put the markings on the Erase Al. And flash it.
2. If this does not help.
Disconnect from USB connector
run utility
Look for 29 & 30 (30-31 or 31-32) pin on the chip and memory to short them
connect the device (should detect a new device) (repeat until you see a new device!) You can vary the performance only with the pins 29-32 and 41-44. Others do not touch!!!
(http://www.flashboot.ru/uploads/news/fuse_mem/mem.png)
Flash your flash drive
If this fails, then you need to change the controller (((
47 - [PREFMT_ERR_SYS_WB_MODE_ERR]
Preformat_Error_System_WriteBlock_Mode_Error -???
Where you've seen this error? (It should be shown in the window. And there are Acsess Error and no digits)
And in this line you can see transcripts of any errors.
ЦитироватьWhere you've seen this error? (It should be shown in the window. And there are Acsess Error and no digits)
hi andy
i am his friend and it happened in this order
first the program gave an access error
(http://i50.tinypic.com/fp5slc.jpg)
we tried many version but the same error
so he opened the flash and according to memory chip info we tried editing g=the option as wrote here
http://translate.google.ru/translate?hl=ru&sl=ru&tl=en&u=http%3A%2F%2Fwww.flashboot.ru%2Findex.php%3Fname%3DNews%26op%3Darticle%26sid%3D31
and the result is
(http://i32.tinypic.com/292bi40.jpg)
this version read the flash with right capacity as shown but when trying to format we got this
(http://i26.tinypic.com/28wjc3p.jpg)
Ok. I understand. Try to run the controller in test mode. Use the algorithm, which I gave above. Or the link to the article:
http://translate.google.ru/translate?js=y&prev=_t&hl=ru&ie=UTF-8&layout=1&eotf=1&u=http%3A%2F%2Fwww.flashboot.ru%2Findex.php%3Fname%3DNews%26op%3Darticle%26sid%3D24&sl=ru&tl=en
ps: I have often seen, when the controller firmware can be seen SK6211 SK6203.
Helps restart a test mode! cross the memory chips pin 30-31 & plug.
here is what i get in safe mode
before flashing
(http://i27.tinypic.com/2cdz5m9.jpg)
after flashing
(http://i25.tinypic.com/117tni8.jpg)
same result what should i do? :(
and what you mean by
Цитироватьps: I have often seen, when the controller firmware can be seen SK6211 SK6203.
Helps restart a test mode! cross the memory chips pin 30-31 & plug.
thanx andy for helping :-X
why when i saved the advanced options i didn't have ready statuse like that
(http://i25.tinypic.com/260ap76.jpg)
and i have the same sample status ???
I found the answer for your question.
same problem solved on another PC (http://translate.google.ru/translate?js=y&prev=_t&hl=ru&ie=UTF-8&layout=1&eotf=1&u=http%3A%2F%2Fwww.flashboot.ru%2Fforum%2Findex.php%3Ftopic%3D2948.0&sl=ru&tl=en)
Here, people do not believe that it will help another PC (http://www.flashboot.ru/forum/index.php?topic=3084.msg17769#msg17769)
the same problem that i have ;)
i will try in another pc and show if it could help :),thanx andy