dobrogo vremeni sutok!
mojno vostANOVIT:
Volume: None
Controller: SSS BE
Possible Memory Chip(s): Not available
Flash ID: 983A98A3 7651
Flash CE: 1
VID: 0930
PID: 6544
Manufacturer: TOSHIBA
Product: TransMemory
Query Vendor ID: TOSHIBA
Query Product ID: TransMemory
Query Product Revision: 1.00
Physical Disk Capacity: 15500574720 Bytes
Windows Disk Capacity: 0 Bytes
Internal Tags: 396H-AAFL
USB Version: 2.00
Declared Power: 200 mA
ContMeas ID: 5C83-02-00
Microsoft Windows 10 x64 Build 17134
------------------------------------
...
Program Version: 9.2.0.627
S[ASIBO
Hi admin.
Please I need firmware for my flash drive with this description:
Description: [D:]USB Mass Storage Device(TOSHIBA TransMemory)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 0930 PID = 6544
Serial Number: 0022CFF6BE01C190FFF1D36A
Device Vendor: TOSHIBA
Device Name: TransMemory
Device Revision: 0100
Manufacturer: TOSHIBA
Product Model: TransMemory
Product Revision: 1.00
Controller Vendor: Solid State Systems
Controller Part-Number: Unknown - 0xBE
Flash ID code: 983A98A37651 - Toshiba TC58TEG7THLTA00 - 1CE/Single Channel [TLC-16K] -> Total Capacity = 16GB
Tools on web: http://dl.mydigit.net/special/up/sss.html
Possible Flash Part-Number
----------------------------
[1CE]TC58TEG7THLTA00 x 1 pcs/Channel x 1 Channel
Flash ID mapping table
----------------------------
[Channel 0] [Channel 1]
983A98A37651
Thanks.
Hello! I have a Toshiba TransMemory 16GB USB drive with an SSS BE controller (VID 0930 / PID 6544). ChipGenius shows Flash ID 983A98A3 7651. The flash drive appears as 0 bytes in Windows.
Is there an MPTool (Mass Production Tool) or other utility to restore this model?
Also, is there any way to switch it into test mode or get more information about the NAND chip?
geometry dash lite (https://geodashlite.io)
Thank you in advance!