Поиск

[30na]

Hi, i have a transcend flash model: HV70/8G ,chip's name is SPANSION
how repair it?
thanks

[_ANDY_]

SPANSION - is a Flash memory chip.
What about controller?
         Online Recovery Tool

[30na]

hi
thanks for your reply

but, this program not detect my flash.

in first my flash vid:3822 and pid:590C

i use Phison_UP8-R_Format for this flash, the format not completed and flash vid,pid is changed

new vid:12E3 and pid:0712

how i can restor orginal vid and pid?

please help me

and excuse me for my poor english.

[_ANDY_]

VID / PID is part of the firmware. Change can be in the firmware. If the controller Phison a utility to its firmware does not allow you to change the VID / PID, and only correct from the standard.
This does not affect the efficiency of the device.
You better open flash case and say labeling the controller (like PS2233 or UP8).

[30na]

chip name is Spansion
have a this code: AL016M90BA101

vid and pid change by Phison_UP8-R_Format

now, not detected by Alcor Program

[_ANDY_]

3. Name of the controller (bottom left chip with 48-pin on all sides)
4. Name of the memory chips. (48-pin to-side) / / HY27UF161G2M (If there is a sticker, then we write that under the sticker!)


Сontroller name is important to select tools!
ps:
Utilities "PHISON" suitable for controllers "PHISON ****" and" UP ** "
Utilities "ALCOR" NOT suitable for controllers "PHISON ****" and" UP ** "