Поиск

[AndreyProz]

Неожиданно умерла флеха. Не определяется. программы выдают:

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 300mA

USB Device ID: VID = 0951 PID = 1630
Serial Number: 0018F30C0842BA30110F0013

Device Vendor: Kingston
Device Name: DataTraveler 200
Device Revision: 0110

Manufacturer: Kingston
Product Model: DataTraveler 200
Product Revision: HMAP

Controller Vendor: Phison
Controller Part-Number: PS2251-33(PS2233) - F/W 01.02.15 [2009-04-18]
Flash ID code:      98D79432 - Toshiba TC58NVG5D2FTA00 [MLC-8K]

---------
Name: DataTraveler 200  (USB2.0)

VID&PID: Vid_0951&Pid_1630
Speed: high speed

Vendor Description: Kingston
Product Description: DataTraveler 200
Serial Number: 0018F30C0842BA30110F0013

---------------
FLASH VENDOR: Kingston
MODEL: DataTraveler 200
VID: 0951
PID: 1630
CHIP VENDOR: Phison
CONTROLLER: PHISON 2251-33 (2233)
MEMORY CHIP: INTEL 29F32B08JCME2
MEMORY SIZE: 32
UTILS: Flash ID: 8988244B A9

Description:

Added: 06 мая 2013

[temalaner]

UP16 = PS2233 = PS2251-33
ПО
http://flashboot.ru/files/file/173/

Длл подержка памяти http://www.usbdev.ru/files/phison/idblktimingdll/
ковыряйте BIN Firmware PS2251-33 [BN33BBN108.BIN, FW33BFF01702.BIN]
ваши Бинарники BN33*
http://www.usbdev.ru/?wpfb_dl=774

инструкция настройка и прошивка http://www.usbdev.ru/articles/a_phison/mpall-repair/

или другая программа UP16  http://www.usbdev.ru/articles/a_phison/uptool-repair/
это сказать не могу , инструкция все там

флешка обязательно перевести тестмод - в гугл помощь!

[Kolbyzymi]

I have a Kingston DataTraveler Vault Privacy, 8 GB drive DTVP30/8GB that stopped working. I does not power up anymore. The blue LED never lights up.

I tried plugging it into multiple computers, no sign of life.

There does not seem to be any visual damage on the PCB.

Any suggestion to try and get it working again? Do these drives have a protection diode/fuse that I could remove or jump ?

Thanks.

[Johnqprk]

We got a case with Kingston SV300S37A/240G, when i checked it on PC3K i can see the SSD is shorting. unfortunately, the controller is SANDFORCE CL13824Z.

In theory, If i get a donor with the same controller and PCB, and ill solder all memory chips to the donor PCB with same controller, what are the chances that would work?

Does anyone came a cross with this issue?

Thanks