Помогите пожалуйста вернуть к жизни флешку GoodRam 128 Gb USB 1st US3281

Восстановление флэш
В эксплуатации была совсем недолго, досталась от человека который забросил неудачные попытки ее восстановить.То что удалось о ней узнать
Под микроскопом разглядел маркировку контролера — USB 1st US3281.
NAND с двух сторон по одному чипу с каждой стороны — маркировка: DFT0512GWD8H1BT1 Y1836.
Вот фото самой платы:


Еще информация из Flash Drive Information
Volume: F:
Controller: Phison PS2309
Possible Memory Chip(s): Not available
Flash ID: AD5E2822 1090
Chip F/W: 01.02.10
Firmware Date: 2018-04-20
MP Ver.: MPALL vFF.FF.FF
VID: 13FE
PID: 5500
Manufacturer: Phison
Product: 2309 Boot ROM
Query Vendor ID:
Query Product ID: 2309 PRAM
Query Product Revision: 1.00
Physical Disk Capacity: 0 Bytes
Windows Disk Capacity: 0 Bytes
Internal Tags: 2RAF-AV9L
USB Version: 2.00
Declared Power: 100 mA
ContMeas ID: F1B9-01-00
Microsoft Windows 10 x64 Build 19045
— www.antspec.com/usbflashinfo/
Program Version: 9.4.0.645

Подозреваю что флешку ранее неудачер прошили прошивкой от другого контролера.

Подскажите пожалуйса — Как и чем ее можно восстановить? Помогите :)
  • avatar
  • 0

18 комментариев

У меня лежит такая же флешка. Тоже нерабочая, также озабочен, можно ли восстановить.
STTOOL_V380_14_SZ_20200506_JC

setting
vccq=1.8
lov level L+H
I CANT GIVE YOU LINK
ERROR ME

BUT I TAKE A PICTURE SETTING
512= MEAN 64GB
IF YOUR FLASH IS 1 =64 IF YOU HAVE A 2 NAND =128
IF YOUR FLASH IS 64 =CHANGE BIN TO 59200
YOUR NAND IS NOT ORGINAL SO WE MUST SCAN AND SORT IT FIRST .MAY BE TAKE 3:50:10
YOUR ID IS 3D TLC SO VCC=1.8VOLT
SCAN MODE L+H
MODE C

SOFTWARE NAME «STTOOL_V380_14_SZ_20200506_JC»
DavodAmirajam, thanks you dear friend! I do it and my usb flash now work, but it capacity has become lower — only 64 Gb, but it must be 128Gb (I have 2 NAND Chip). Please take a screenshot with settings for 128Gb (2 NAND) and i try again. Thank you very much man, I am very grateful to you. <3
Please do a screenshot with settings for 2 NAND and 128 Gb capacity
If i try set B1 = 118 400 i take error after scan and red window «Under capacity»
may be 1 nand unploged from pcb
use soldring all nand pin carefully +use good flux

first post here screen shot
if you can bring ce1=60000mb
and if you change it to 120000 give you error
may be ce 2 pin is broked .resolder it again
in 50% 2ce flash= if 1 ce work ??? so solder again all pin .carefully
post here .in public may be help people
Why am I suspicious of NAND PIN solder
IN AUTOMATIC MODE CONTROLLER DETECT ALL 2 NAND
MAY BE NAND 2 .NOT INSTALLED WELL
WOW! IT'S GREAT) Thanks you my hero! My GoodRAM USB flash now work and capacity 128 Gb now correct.
I do test with «h2testw» software — OK sucess!
Test finished without errors.
You can now delete the test files *.h2w or verify them again.
Writing speed: 9.60 MByte/s
Reading speed: 16.5 MByte/s
H2testw v1.4
IRAN — MY FAVORITE COUNTRY, THANK YOU VERY MUCH DEAR FRIEND, DEAR DAVOD AMIRAJAM. I AM HAPPY!)
IT&#39;S MY LAST SETTINGS WHEN FLASH IS BACK TO LIFE. I WILL GLAD IF IT HELP SOMEONE OF PEOPLES!
I suspect that the flash drive was previously flashed with firmware from another controller.
Please do a screenshot with settings for 2 NAND and 128 Gb capacity

Оставить комментарий

Имя: