Kingston DTLocker+G2 удаление CD-ROM

Автор Flight45, 22 Января 2013, 20:05:07

0 Пользователей и 1 Гость просматривают эту тему.

Flight45

Имеется флэшка Kingston DTLocker+G2 с предустановленным производителем CD-ROM и программой защиты без установки которой флэшка не читается. Возможно ли из нее сделать обычную флэшку? На сайте производителя на этот вопрос дан однозначный ответ - нет. Может быть есть какие-нибудь обходные пути?
VID: 0951
PID: 1690
HID VID: 0951
HID PID: 000D
Manufacture Name: Kingston
Product Name: DTLocker+G2
Flash ID: 98 d7 94 32 76 55 0c 00
MP ver.: MP v 48.30.30
Flash Type: TOSHIBA
FW Version: 01.07.10
FW Date: 2010-06-08
ICVersion: 2251-63
Mode: 21
AES: ENABLE
MAX_NOA: 10
Normal Hidden Area Size: 0 (KB)
Protected Hidden Area Size: 128 (KB)
Total Capacity: 7864320 (KB)
Lun 0 Capacity: 7664 (MB)
Lun 1 Capacity: 12 (MB)

В разделе Partition Settings Phison_PS2251_MPALL_v3.33.0C ни в какую не хочет, ставить режим работы отличный от 31.
Скрины с параметрами разделов:






marco

Sorry I have to write in english.
I have a Verbatim 4GB Secure'n'Lock USB Key that has a CD-ROM partition and an Encrypted Partition.
I have opened it and it has a Phison 2251-63 inside.
I want to remove CD-ROM and encryption.
I've tryied to use Phison MPALL v3.63.0C but I need the PVCO Key and the CD Key: where can I found them?

thanks
Marco

marco

Hi,
if you run MPParamEdit_F1.exe of the Phison MPALL v3.63.0C packet
you'll see that there are two fields called: PVC 0 Key and CD-Key
They are disabled usually....but, if you select the Phison2251-63 (it's my IC)
then the two fields (PVC Key and CD-Key) are enabled and you need to provide
two files: a PVC0-*.bin and a CDK-*.bin (see attached images)
If I don't provide those two files, when I try to flash my USB Key I get the error message:
"Load PVC0 KEy Fail! please check it!"

This is why I am asking you if yiu know what are those files or where can I find them or if I can build them up on my own.

I think that these files are required only if you have a crypted IC like the 2251-63.

Reason why I need to flash my USB Key:
I need to remove the "CDFS" and "Crypted" partitions from my Verbatim USB key,
because I bought a lot of them and they are not working with the Linux Machines that I have at work.

thanks
regards
Marco

mic123

Доброго времени суток
кто-то решил?
тоже интересен этот вопрос