Hello everybody
sorry for my English. I have a little problem I can't find a solution to form my usb 128gb key read only windows. but it is recognized perfectly by android box. but impossible to format it on Windows
Logical drive : F:\ Capacity: 0.0G
Device ID : VID = 0781 PID = 559C
Device SN : 4C531001620803105120
Device version : 1.00
Device vendor : SanDisk
Device model : LPVR
Protocol : USB2.0
Max power : 224mA
Partition type : øÿÿÿÄ⯠Device active : no
Aligned state : 0 KB, Have been Aligned
Network error, the request for chipmodel failed!
OS Version : Windows Unknown Professional
Description: Generic USB Hub
Device Type: Single-TT High Speed USB HUB
Protocal Version: USB 2.00
Current Speed: High Speed
The HUB has: 6 ports
USB Device ID: VID = 8087 PID = 0024
Device Revision: 0000
Controller Part-Number: Unknown
Description: Contrôleur d'hôte compatible xHCI USB
Device Type: Universal Serial Bus Controller
PCI Device ID: VEN = 1B21 DEV = 1042
Revision: 00
The HUB has: 4 ports
Description: Contrôleur d'hôte amélioré USB à circuit microprogrammé Intel(R) de la série 6/C200 - 1C26
Device Type: Universal Serial Bus Controller
PCI Device ID: VEN = 8086 DEV = 1C26
Revision: 05
The HUB has: 2 ports
Volume: F:
Controller: SanDisk
Possible Memory Chip(s): Not available
VID: 0781
PID: 559C
Query Vendor ID: SanDisk
Query Product ID: LPVR
Query Product Revision: 1.00
Physical Disk Capacity: 124218507264 Bytes
Windows Disk Capacity: 0 Bytes
Internal Tags: 3W4F-SCDL
USB Version: 3.00 in 2.00 port
Declared Power: 224 mA
ContMeas ID: 26A5-02-00
Microsoft Windows 10 x64 Build 18363
------------------------------------
...
Program Version: 9.3.0.630