Поиск

[keks1k]

Добрый день. Подскажите, как решить мою проблему. Форум перечитал, но данная проблема не решена. Суть вот в чем - имеется флешка Kingston DT R3.0 64 Гб. В системе определяется, но пишет вставьте диск в устройство. Запуская MP tool и вставляя флешку, опознает как неопознанное устройство. Замыкая контакты, перевожу в тестовый режим, прога нормально определяет, но при прошивке выдает сообщение Code error 001F.
Разобрал флешку- на контроллере написано:
SK6221
CANQC
A1223
3824v8392
На памяти написано(две микросхемы памяти):
TH58nvg8d2gta20

Пытался прошивать SK6221_MpReleaseC_20120608 , Skymedi_USB3.0 PDT_20140526, Skymedi_USB3.0 PDT_20130425, SK6221_MpReleaseC_20120831, но все время одно и то же -  в начале прошивки выскакивает ошибка Code error 001F.



ChipGenius_v4_00_0807

Description: [I:]Запоминающее устройство для USB(SKYMEDI USB Drive)
Device Type:??Mass Storage Device

Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
Current Speed: High Speed
Max Current: 500mA

USB Device ID: VID = 1516 PID = 6221

Device Vendor: SKYMEDI
Device Name: USB Drive
Device Revision: 0100

Manufacturer: SKYMEDI
Product Model: USB Drive
Product Revision: 1.00

Controller Vendor: Skymedi
Controller Part-Number: SK6221
Flash ID code:??983A9182 - Toshiba - 1CE/Single Channel [SLC] -> Total Capacity = 16GB



GetFlashInfo

Volume: I:
Controller: SkyMedi SK6222
Possible Memory Chip(s): Not available
Flash ID: 983A9182 7A52
Flash CE: 1
VID: 1516
PID: 6221
Manufacturer: SKYMEDI
Product: USB Drive
Query Vendor ID: SKYMEDI
Query Product ID: USB Drive
Query Product Revision: 1.00
Physical Disk Capacity: 0 Bytes
Windows Disk Capacity:  0 Bytes
Internal Tags: LKAG-AACJ
USB Version: 3.00 in 2.00 port
Declared Power: 500 mA
ContMeas ID: EBA6-15-00
Microsoft Windows 7 SP1 x64 Build 7601
------------------------------------
...
Program Version: 8.7.0.597

[Philelbz]

Just to update: I received two identical replacement Kingston cards, but these have the same error.

[GALOgrebs]

We got a case with Kingston SV300S37A/240G, when i checked it on PC3K i can see the SSD is shorting. unfortunately, the controller is SANDFORCE CL13824Z.

In theory, If i get a donor with the same controller and PCB, and ill solder all memory chips to the donor PCB with same controller, what are the chances that would work?

Does anyone came a cross with this issue?

Thanks

[Thomaswbda]

Hi guys
Can anybody help with the above error code.
This is what I get but not sure what the problem is.
P 0235 boost pressure signal to donors large C 031
P 0235 boost pressure donor signal too small C 031

Thanks

[luda2004dah]

РџСЂРё РІС...РѕРґРµ РІ программу РІС‹С...РѕРґРёС, ошибка,никакие С,,ункции РЅРµ РґРѕСЃС,СѓРїРЅС‹ РєСЂРѕРјРµ поддержки.
Undefined name
Dynamic SQL error.
SQL error code = - 204
Procedure Unknown
GET_INT_VALUE.
At line 1, Column 17.

[RememRof]

This official firmware Error Code 18005 Fix firmware solition

Note: Pls check your version and flash firmware working.

[AlbertBoark]

Help When trying to run the Attendance Summary Report, I get Error 1426 Error Code Invalid Number of Parameters. 
Any advice?
Amanda

[Opibly]

Kingston SSDnow 300 no Power at all, anyone worked on this problem before?
It seems it uses electronic fuse/protection?

Thank you