I want to help solve the problem of flash apacer

Автор cherifdiar, 10 Марта 2011, 12:26:59

0 Пользователей и 1 Гость просматривают эту тему.

cherifdiar

I want to help solve the problem of flash apacer Requires firmware The following is well known ps2233
MPV255.FF.FF
FW01.05.10
2008.05.30
VIP/ 13FE   AND PID /3100

cherifdiar


Thanks for the reply
I gave the program



The second program not respond to Flash

_ANDY_


cherifdiar


My friend Magistrz
I gave the program

The second program was given

cherifdiar


cherifdiar


_ANDY_


cherifdiar

The program was given

And I want to flash the image below

cherifdiar


The program was given

And I want to flash the image below

cherifdiar


_ANDY_

What GetInfo Shows?
.....

If controller chip is realy PS2233, try to use Phison MPTool MP2232 v1.11.0 (PS223X, AE2263, UP10-UP14)

ParamEdt-F1-v2.1.0.2.exe
choose PS2233
FC1-FF FC2-01
mode = 3
click on "Do ISP" and choose:
...v1.11\BBN103.BIN
...v1.11\BFF01702.BIN

cherifdiar

Thank you for your help to me and I gave a negative result shown in the picture


_ANDY_

USB flash drive is open? The controller is defined visually?
Perhaps PS2251-33?!
Otherwise, the internal controller memory is damaged and does not accept the firmware!

If 2251-33 - use MPTOOL.

cherifdiar


_ANDY_

Цитата: _ANDY_ от 17 Марта 2011, 14:56:53
What GetInfo Shows?
I think that FC2-FF. That means hardware error or microcode in the controller blocks it work with NAND.
Try test mode.


cherifdiar


cherifdiar