Добрый день, люди добрые!
Transcend 8Gb
Flash Drive Information Extractor
Volume: I:
Controller: Silicon Motion SM3257 ENAA
Possible Memory Chip(s):
Samsung K9ACGD8U0A
Memory Type: TLC
Flash ID: ECDE98CE 74C4
Flash CE: 1
Chip F/W: ISP NONE
MPTOOL Ver.: 0.00.00
VID: 090C
PID: 3000
Manufacturer: Silicon Motion,Inc.
Product: SM3255AA MEMORY BAR
Query Vendor ID:
Query Product ID: USB MEMORY BAR
Query Product Revision: 1000
Physical Disk Capacity: 0 Bytes
Windows Disk Capacity: 0 Bytes
Internal Tags: 8VAG-ASEG
USB Version: 2.00
Declared Power: 100 mA
ContMeas ID: 296C-01-EE
Microsoft Windows XP SP3 Build 2600
------------------------------------
...
Program Version: 9.0.0.612
ChipGenius_v4_18_0203
Description: [I:]Запоминающее устройство для USB(USB MEMORY BAR)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 090C PID = 3000
Device Vendor: Silicon Motion,Inc.
Device Name: SM3255AA MEMORY BAR
Device Revision: 0100
Product Model: USB MEMORY BAR
Product Revision: 1000
Controller Vendor: SMI
Controller Part-Number: SM3257ENAA - ISP NONE
Flash ID code: ECDE98CE - Samsung K9ACGD8U0M - 1CE/Single Channel [TLC-8K] -> Total Capacity = 8GB
Tools on web:
http://dl.mydigit.net/special/up/smi.htmlPossible Flash Part-Number
----------------------------
[1CE]K9ACGD8U0M(27nm) x 1 pcs/Channel x 1 Channel
Flash ID mapping table
----------------------------
[Channel 0] [Channel 1]
ECDE98CE --------
-------- --------
-------- --------
-------- --------
-------- --------
-------- --------
-------- --------
-------- --------
ChipEasy_EN_V1.5.6.6
Logical drive : I:\ Capacity: 0.0G
Device ID : VID = 090C PID = 3000
Device SN :
Device version : 1000
Device vendor :
Device model : USB MEMORY BAR
Protocol : USB2.0
Max power : 100mA
Partition type : Device active :
Aligned state : Misaligned
Controller : SMI
Controller model: SM3257ENAA
Flash Vendor : Samsung, Type: TLC, Single channel, Total: 8G
Flash ID : ECDE98CE Flash Part: K9BDGD8U0M
Score : 24 (Normal Score >= 30)
Firmware : ISP NONE
Tools :
http://www.upan.cc/tools/mass/SMI/OS Version : Microsoft Windows XP Professional Service Pack 3
Update Status : The current version is the latest version!
Пробывал :smi_mptool_v2.5.27_v1_m0902_3257enaa-(висит в постоянном "Pretest")
smi_mptool_v2.5.27_v8_m1004_3257enaa-(висит в постоянном "Pretest")
Dyna Mass Storage Production Tool v13.11.01.03 M1102 [SM3257ENAA] ; Star_SM3257ENAA_M1102-ошибка (Bad Block over setting 0X11 (Fail)
Dyna Mass Storage Production Tool v14.07.18.02 N0726 [SM3257ENAA] ; Star_SM3257ENAA_N0726-процесс прошивки заканчивается вот этим: "Open card finish 0mb 2p,, no tog
Флэшка в пк определяется как: "Usb Memory Bar Usb Device"
Настройки в утилитах оптимальные, взяты из инструкций. Что-то не так делаю?