К примеру у меня стоит 2 hdd На первичном разделе терабайтника win 7 На первичном разделе 500gb можно сказать загрузочная флешка. На винте ваять флеху быстрей и проще. Акронисом создан образ 7ки. Тоесть если винда в неподходящий момент слетела — загружаюсь со второго винта как с флешки 5мин и всё в порядке
Утилита очень удобная и все работает на отлично. Однако есть вопрос, если имеются образы WPI сборники не являющиеся загрузочными как их прикрепить? Стоит ли создавать отдельно загрузочные образы с необходимым софтом или же можно имеющийся как-то прикрепить? Спасибо.
FRIST OF ALL USE GETINFO.EXE FROM PHISON MPALL 3.63.C
IN GET INFO MAY BE YOU CAN FIND CONTROLLER MODEL
OR
OPEN THE FLASH COVER TAKE A GOOD PICTURE OF FLASH
I WILL HELP YOU
1-------Frist Use Restore-v3.12.0.0.exe
2--If doesent work USe
UPTool_Ver2070_0703(Release)
Frist Clean Flash To Erase all Block And Click Start
Or Use Mpall 3.63.c
And Use Frimware For 2267
And Dont Forget To
Mlc Flash Use X.X.X10
Mlc 4k Use X.X.24
Ed3 Tlc Use x.x.53 (Example 6.05.53)
Using Mpall Like 2250 We Talk About Mpall In This Page
Frist REad All .And Do That
2251-33 or 38=Use Mpall 3.20
2251-50 =Mpall 3.29.b
2251-60-61-67 Mpall 3.61 or 3.63.c
And Frimware File In Tagaraz site usbdev.ru or upan.cc
Good Luck
BUT 90% HAPPEND IN SMI +B74 IM FLASH
USE IT MAY BE REPIARED
RecoverTool_V2.00.28_L0920.exe
Plase Read Accurate
My Friend have Jet Flash V 88 Alcor 6990+Micron L74
He Say Me I Have A best Nand (Orginal Brand Micron L74 (not SpecTek mark))
But Lose Frimware Why? Its MLC and Good Mlc?
Answer:
Jet Flash Used Frimware 8413 For Single Channel L74
Read 27
Write 12
So In True Micron L74 Real MAX one Channel Speed is w=8 Read =22
Jet Flash Is OverClocking For Good Speed But In Real If We Have L84 also In 1 Chennel 1Ce =Max Write is =12
In JetFlash V600 And V620 Also We See Mor Than 20% Lose Frimware
So In Some Frimware Used Over Using Of Nand Memory Ability
Also 100% I Say 100% Phison 2251-03 and Toshiba Tlc ed3 Is Write Prodect Error
Why?
Ed3 Rel Write Speed Is 4.2 Mb
May Be Some Frimware Used 4M Buffer But You Buy This And Undrstanding Me After 2 Week
And SMi Used Sumsong K9ACGD8U0M
And Usb 3 =2203 Used 1 Flash 2ce Toggle
After All Write Speed Is So Important Than Read Speed
Bec In digital record if write speed is low in recordedd File make noise and Crupted
And Time
Tlc Memory is Pressed And 50% may be Losed Frimware and Lost Data
in 90% Dammeged Flash =We Know the nand is tlc
2261-ed3 I think in 100 Make 80 Flash Losed Frimware
Phison Make 12 Frimware For Ed3
3.a.53 =3.10.53
3.b.53
and
3.C.53
But Memory Is Not Good We Cant Assurance Data on Tlc Flash
In Ssd 100% Used Mlc Flash
Now Micron And Intel Make l72,l74,l83,L84
But We Just See Sandik And Toshiba Tlc
If Lucky =Sumsong Toggle
So Flash technology is not good to go to our
New Jet Flash Used K9ACGD8U0M Tlc Toggle Flash
in 8Gig Read =30 Write =5
In 2Ce Or K9BDGD8U1M Read =30 write =~12
Not Bad So Better Of ED3
I Test Mlc And Tlc Toggle On Sm3257 Ena
REsult
Realy I dont know Why ?I think New Nand 19nm May Be Have A Problem In Multi Channel