Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA

USB Device ID: VID = 0781 PID = 5530
Serial Number: 0123456789ABCDEF

Device Vendor: SanDisk Corporation
Device Name: Firebird6Up9
Device Revision: 0105

Manufacturer: SanDisk
Product Model: Firebird
Product Revision: 1.05

we need controller model?

if usb3=i think 2251-03
if usb2=2251-67

mpall 3.63c +frimware for ic

не помогла, прога не видит флэшку
Transcend JetFlash 300 2Gb (Alcor AU6986)

триндебец столько слов и все не поделу

Zmey, как успехи по слепки win7 + win8? У меня не получается.

thanx mr davod
i fix it with URescue_v1.2.8.10
(frist erase all block and use urescue)

thank you DavodAmirajam

Флэшка во время прошивки была извлечена, VERICO TUBE 8GB, удалось снять корпус, там ТОЛЬКО 2 КОНТАКТА, я их замыкал, но результата никакого. Как восстановить такую флэшку?

CПС огромное ))) тоже помогла утилита AlcorMp 12.12.14 MD
поднял Transcend 16GB

AlcorMP_D3eD3_v13.02.01.07
Вот эта помогла. Большое спасибо. сам бы вечность колупал

to all my friend if controller is alcor or smi use online recovery

online recovery also lasted frimware and good Aligned flash seeting

i dont undrstand your mean but

frist use online recovery to update Frimware
your frimware is old

Second Jetflash Online recovery Change the 500Ma to 200Ma

Note:

Micron And Intel L74 Not Work Well With 500ma
chane in mp to 200ma

— Also If in boot menu you cant see flash

update bios from mainboard website
and enable usb legacy from bios

and write problem in english to some one help you

use last online recovery
AlcorMP_AU698x_RT_v1.0.0.14_L0117 is old

your controller is au6989n

so use jetflash online recovery

or AlcorMP_D3eD3_v13.02.01.07

i install 2 hinyx mlc 1ce so
i must to close 2+3

in some pcb may be take jumper in other place but we find with datashet of pcb or use on other people Experiences

in every flash some jumper to Position And Controller must Undrstand How Many Flash Installed on Pcb

If you Dont Do This May be Flash Capacity is small or Bigger Than Real Capacity look That

soldring in new pcb

and in mp tool check flash id

note:

Pqi ,Silicon Power ,Some kingstone (Ex 32g controller in the flash connctor 2232+4 mlc lga flash)

have a Weak Pcb

so if have a problem white not detect flash id

we must frist of all

open the flash case and check nand flah

in my case after Full Extract nand i see the broken IO

some people think Problem Alwayse is software and Try Mp Tools
but we must Know 50% Have a Hardware problem.

Thank you all

and plase ,Plase

If You not Interests about this or dont like this do not comment here or

Sex ads

after all we have the flash and data

now clean the nan flash broken side and resoldring an new pcb

now me moved and soldring be full definitude

I am not robot but after 30 min install true controller

Запятую уберите в первой ссылке :)