Здравствуте!

Есть такая проблема, при подключении флешки появляется устройство «USB Mass Storage Device» но самого диска ни в проводнике ни в «Управлении дисками» не видно.

SMI MPTool v2.5.27_v1_m0902_3257enaa
ChipEasy_EN_V1.5.6.6
Flash Drive Information Extractor v7.7
флешку не видят

CheckUDisk v5.4 показывает вот такую информацию:
Name: unknow device (USB2.0)
VID&PID: Vid_090c&Pid_1000
Speed: high speed
Vendor Description:
Product Description:
Serial Number:

Пробывал устанавливать драйвер «SMI Factory Driver» от SMI MPTool v2.5.27_v1_m0902_3257enaa картина немного улучшается …
при подключении появляется устройство«SMI Factory Driver»

CheckUDisk v5.4 показывает:
Name: Fuse (USB2.0)
VID&PID: Vid_090c&Pid_1000
Speed: high speed
Vendor Description: Leef
Product Description: Fuse
Serial Number: 0114000000014105

В SMI MPTool в «Config HUB» появляется «О» вместо «Х» … но на основном экране попрежнему ничего нет …

до того как флешка умерла с неё были получены вот такие данные:
FLASH VENDOR: Leef
MODEL: Fuse
VID: 090C
PID: 1000
CHIP VENDOR: SMI
CONTROLLER: SM3257ENAA
MEMORY CHIP: TH58TEG8T2JBA4C
MEMORY SIZE: 32

Ну и собственно вопрос можно ли как то её восстановить … или хотябы что ещё можно попробывать?

PS. Флешка «монолит»…
Читать дальше →

Hi
I would create cd-rom on ufd SM3257ENAA. I face to a error and ufd couldn't recognize normally. In device manager it detected but had not drive letter. So, I use «SMI Factory Driver» with [VID = 090C PID = 1000]. After that, SMI MPTool could detect it using «Factory Driver and Hub» option. I began to flashing but it still on Testing. I would stop flashing, so i use «quit» button and then un-plug ufd. after re-plug windows detect it with SMI Factory Drive but SMI MPTool hang when I pressing «Scan USB (F5)».
I try on another windows but is same.
There is any way to revival ufd?

———————————————————————————————————
Description: [M:]USB Mass Storage Device(SMI USB DISK)
Device Type: Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 500mA

USB Device ID: VID = 090C PID = 1000

Device Vendor: SMI Corporation
Device Name: USB DISK
Device Revision: 1100

Manufacturer: SMI
Product Model: USB DISK
Product Revision: 1100

Controller Vendor: SMI
Controller Part-Number: SM3257ENAA – ISP 120119-AA-
Flash ID code: 98DE9493 – Toshiba – 1CE/Single Channel [MLC] -> Total Capacity = 8GB

Tools on web: dl.mydigit.net/special/up/smi.html

Possible Flash Part-Number
—————————-
Unknown

Flash ID mapping table
—————————-
[Channel 0] [Channel 1]
98DE9493 ——--
——-- ——--
——-- ——--
——-- ——--
——-- ——--
——-- ——--
——-- ——--
——-- ——--
—————————————————————————————————--

I clean registery and re-plug it. SMI MPTool dont detect it.
ChipGenius report it:
====================================
Description: USB Mass Storage Device

Protocal Version: USB 2.00
Current Speed: Low Speed

USB Device ID: VID = 090C PID = 1000

Device Revision: 1100

Controller Part-Number: Unknown
=====================================

Also install SMI factory driver ( 090C/1000). but SMI MPTool hanged when I press «Scan USB » button.
Now ChipGenius report it:
=====================================
Description: SMI Factory Driver(DataKey USB Disk)
Device Type: Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 500mA

USB Device ID: VID = 090C PID = 1000
Serial Number: AA00000000010564

Device Vendor: DataKey
Device Name: USB Disk
Device Revision: 1100

Controller Part-Number: Unknown
===================================

I become confused!!!
Читать дальше →

Доброго времени суток!!!
Люди добрые, помогите восстановить флэху!

Собсно сабж: Verico Wanderer 16 (V16G12Q3MIA)

Name: USB Mass Storage Device (USB2.0)

VID&PID: Vid_048d&Pid_1171
Speed: high speed

Vendor Description: iTE Tech
Product Description: USB Mass Storage Device
Serial Number: 0000000026A68D6D

\\.\PHYSICALDRIVE2
\\?\usbstor#disk&ven_udisk&prod_pdu01-16g_c8h2.0&rev_0.00#0000000026a68d6d&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
VendorID: UDISK
ProductID: PDU01-16G C8H2.0
Product Revision: 0.00
Logic Driver: H:\ (Total Space: 0.00 MB, Free Space: 0.00 MB)
Читать дальше →

I have the drive

Controller: Silicon Motion SM3261 AAS
Possible Memory Chip(s):
Intel 29F32B08MCMF2 *2
Intel 29F32B08MCMF3 *2
Memory Type: MLC
Flash ID: 8984643C
Flash CE: 2+2
Flash Channels: Dual
Chip F/W: ISP 121022-1AB
VID: 090C
PID: 3261
Manufacturer: A-Data
Product: 64GB
Query Vendor ID: A-Data
Query Product ID: USB DISK
Query Product Revision: 1100
Physical Disk Capacity: 66873982976 Bytes
Windows Disk Capacity: 0 Bytes
Internal Tags: 8S2F-AAGJ

The USB drive is no longer recognized by the PC — it show only USB mass storage device or SMI Factory Driver in the Device manager — depend from the driver. The SMI MPtool not recognize the drive at all even with the factory driver.
I used smi_mptool_v2.5.03_v3_l1130v2_3261aa_3261ab
Please help me…
Читать дальше →

Знакомый принес флэшку купленую по дешевкe на aliexpress.com. Флэшка глючила и невозможно было записать на нее ничего.   Флэшка не приклеена к корпусу. Поддел ногтем и она легко вышла из металлического корпуса. Надписи на самой флэшке(видно на 4 фотографии):A07K11K8A6MF A1 1512 7TДо: После:Windows XP Professional sp3 eng VL, Device ManagerUSB\Vid_0000&Pid_7777&Rev_0101USB\Vid_058f&Pid_6387&Rev_0101 CheckUDisk v5.4Name: Mass Storage (USB2.0)

VID&PID: Vid_0000&Pid_7777
Speed: high speed

Vendor Description: Generic
Product Description: Mass Storage
Serial Number: 5432095C

\\.\PHYSICALDRIVE1
\\?\usbstor#disk&ven_generic&prod_flash_disk&rev_8.00#5432095c&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
VendorID: Generic
ProductID: Flash Disk
Product Revision: 8.00
Logic Driver: G:\ (Total Space: 0.00 MB, Free Space: 0.00 MB)
Name: Mass Storage (USB2.0)

VID&PID: Vid_058f&Pid_6387
Speed: high speed

Vendor Description: Generic
Product Description: Mass Storage
Serial Number: 1F773988

\\.\PHYSICALDRIVE1
\\?\usbstor#disk&ven_generic&prod_flash_disk&rev_8.07#1f773988&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
VendorID: Generic
ProductID: Flash Disk
Product Revision: 8.07
Logic Driver: G:\ (Total Space: 7.68 GB, Free Space: 46.82 MB)
 ChipEasy_EN_V1.5.6.6Logical drive: G:\ Capacity: 0.0G
Device ID: VID = 0000 PID = 7777
Device SN: 5432095C
Device version: 8.00

Device vendor: Generic
Device model: Flash Disk
Protocol: USB2.0
Max power: 200mA

Partition type: Device active: OK
Aligned state: Misaligned

Controller: AlcorMP
Controller model: AU6983 Help?
Flash Vendor: SanDisk
Score: 8 (Normal Score >= 30)

Tools: www.upan.cc/tools/mass/Alcor/
OS Version: Microsoft Windows XP Professional Service Pack 3
Update Status: The current version is the latest version!
Logical drive: G:\ Capacity: 7.7G
Device ID: VID = 058F PID = 6387
Device SN: 1F773988
Device version: 8.07

Device vendor: Generic
Device model: Flash Disk
Protocol: USB2.0
Max power: 200mA

Partition type: NTFS Device active: no
Aligned state: 2720 KB, Have been Aligned

Controller: AlcorMP
Controller model: AU6983/AU6987HL/SC708/FC8508 Help?
Flash Vendor: SanDisk
Score: 12 (Normal Score >= 30)

Tools: www.upan.cc/tools/mass/Alcor/
OS Version: Microsoft Windows XP Professional Service Pack 3
Update Status: The current version is the latest version!
 ChipGenius_v4_00_0807Description: [G:]USB Mass Storage Device(Generic Flash Disk)
Device Type: Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA

USB Device ID: VID = 0000 PID = 7777
Serial Number: 5432095C

Device Vendor: Generic
Device Name: Mass Storage
Device Revision: 0101

Manufacturer: Generic
Product Model: Flash Disk
Product Revision: 8.00

Controller Vendor: Alcor Micro
Controller Part-Number: AU6989SNL/AU6989SN-GTA [EF01] — F/W FD85
Flash ID code: 454C98A3 — SanDisk — 1CE/Single Channel [TLC] -> Total Capacity = 16GB

Tools on web: dl.mydigit.net/special/up/alcor.html
Description: [G:]USB Mass Storage Device(Generic Flash Disk)
Device Type: Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA

USB Device ID: VID = 058F PID = 6387
Serial Number: 1F773988

Device Vendor: Generic
Device Name: Mass Storage
Device Revision: 0101

Manufacturer: Generic
Product Model: Flash Disk
Product Revision: 8.07

Controller Vendor: Alcor Micro
Controller Part-Number: AU6989SNL/AU6989SN-GTA [EF01] — F/W FD05
Flash ID code: 454C98A3 — SanDisk — 1CE/Single Channel [TLC] -> Total Capacity = 16GB

Tools on web: dl.mydigit.net/special/up/alcor.html
 usbflashinfoVolume: G:
Controller: Alcor 5019 (AU6989SN)
Possible Memory Chip(s): Not available
Flash ID: 454C98A3 7651
Flash CE: 1
Chip Code: 0xEF01
Chip F/W: FD85
Group: 98
VID: 0000
PID: 7777
Manufacturer: Generic
Product: Mass Storage
Query Vendor ID: Generic
Query Product ID: Flash Disk
Query Product Revision: 8.00
Physical Disk Capacity: 134217728000 Bytes
Windows Disk Capacity: 0 Bytes
Internal Tags: AYWR-S93Y
USB Version: 2.00
Declared Power: 200 mA
ContMeas ID: 517D-01-00
Microsoft Windows XP SP3 Build 2600
— www.antspec.com/usbflashinfo/
Program Version: 8.4.0.588
Volume: G:
Controller: Alcor 5019 (AU6989SN)
Possible Memory Chip(s): Not available
Flash ID: 454C98A3 7651
Flash CE: 1
Chip Code: 0xEF01
Chip F/W: FD05
Group: 98
VID: 058F
PID: 6387
Manufacturer: Generic
Product: Mass Storage
Query Vendor ID: Generic
Query Product ID: Flash Disk
Query Product Revision: 8.07
Physical Disk Capacity: 8254390272 Bytes
Windows Disk Capacity: 8251600896 Bytes
Internal Tags: AYWR-S89Y
File System: NTFS
Relative Offset: 2720 KB
USB Version: 2.00
Declared Power: 200 mA
ContMeas ID: 517D-01-00
Microsoft Windows XP SP3 Build 2600
— www.antspec.com/usbflashinfo/
Program Version: 8.4.0.588
  После долгих мучений и поисков подошла программа: AlcorMP(150915.MD) 1. Зашел в Setup(S) 2. Нажал Ok 3. В настройках в разделе: Flash Type, выбрал Manual Selection ручную настройку и указал Flash Num 1, Channel Single Channel как на скрине и нажал Ок. 4. Далее нажал Start(A) и подождал до окончания процесса. В итоге флэшка стала на 8GB. Скопировал около 7ГБ информации на нее заняло около 30 минут, вроде нормально без ошибок но время покажет. Может быть ВАЖНО: В первоначальном состоянии флэшки пробовал(тестил) программой h2testw около 101ГБ(больше не было места на разделе). Программа протестила весь этот объем без ошибок. Думаю программа h2testw не все фэйки распознает. Успехов.
Читать дальше →

Description: USB Mass Storage Device(GENERIC USB Mass Storage)
Device Type: Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA

USB Device ID: VID = 0C76 PID = 0005

Device Vendor: GENERIC
Device Name: USB Mass Storage
Device Revision: 0100

Manufacturer: GENERIC
Product Model: USB Mass Storage
Product Revision: 1.00

Controller Vendor: Solid State Systems
Controller Part-Number: Unknown — 0xBE
Flash ID code: 983A98A3 — Toshiba — 2CE/Single Channel [TLC] -> Total Capacity = 32GB

Tools on web: dl.mydigit.net/special/up/sss.html

Possible Flash Part-Number
— Unknown

Flash ID mapping table
— [Channel 0] [Channel 1]
983A98A37651 — — — 983A98A37651 — — --------
Читать дальше →

با سلام
یک عدد فلش 16 گیگ دارم با مشخصات ارسالی
با برنامه نسخه2090 عملیات انجام میدم ولی در انتها با خطا روبرو میشوم
ممنون میشم در این زمینه راهنمایی بفرمایید

Description: [L:]USB Mass Storage Device(2268 PRAM)
Device Type: Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 50mA

USB Device ID: VID = 13FE PID = 3E00

Device Name: 2268 PRAM
Device Revision: 0110

Product Model: 2268 PRAM
Product Revision: 1.00

Controller Vendor: Phison
Controller Part-Number: PS2251-68(PS2268) — F/W 01.02.10 [2015-03-25]
Flash ID code: 983A98A37651 — Toshiba TC58TEG7THLTA00 [TLC-16K]

Tools on web: dl.mydigit.net/special/up/phison.html

Possible Flash Part-Number
— [1CE]TC58TEG7THLTA00
[2CE]TH58TEG8THLTA20

Flash ID mapping table
— [Channel 0] [Channel 1]

0:00.0 — 0:00.0 New Flow Initial… 2090
0:00.0 + INQ:… 2268 SORTER V1.01.00PMAP1234
0:01.0 + ISP Version: OS68 Ver 1.08k (2014.08.07-1)
0:01.0 + ForceID:98-3A-98-A3-76-51-00-00
0:01.0 + Flash Unit Index = 91 / (271) / 628
0:01.0 — ID: 98-3A-98-A3-76-51 x 1
0:01.0 — Mask: FF-FF-EF-FF-FF-8F
0:01.0 — Flash Parameters: 15nm,x8,2892,128,32, HW.ECC=60,844
0:01.0 Flash Notes: Toshiba 1znm eD3 (2014.08.04)
0:01.1 + New CE Mode_3=00, CEMask=01
0:01.3 + ECC setting: 60, 60, 50
0:01.3 * Model=1E-2-1
0:01.3 — UP23N,,TC58TEG7THL(eD3.16K)-16GB[1/1]
0:01.3 + Total effective blocks = 1 x 1 x 2892 = 2892
0:01.3 + Bad Column Init…
0:01.3 >>> Flash Not Support OBC <<<
0:01.3 — 0:01.3 Test & Scan Stage… 1 FSlot mode
0:01.3 [ High Level Format + TestMode=0]
0:01.3 >> Mode=3, Optimize=1, SizeMode=1
0:01.3 + CE=1, Page Layout Mode = 0, MaxWL=128
0:01.3 + Searching… CK 1,1,2892
0:01.3 + Search CE=0,DIE-0 (0000~0B4C)
4:24.4 ### ce=0, die=0 — NO IB ###
4:24.4 *** Warning: CE-0, DIE-0 not found IB
4:24.4 + Total effective blocks = 1 x 1 x 2892 = 2892
4:24.4 [DefectBlock]… C3
4:24.4 + CE-0(Die-0): ### All Bad ###
4:24.4 — Total 2892 Bad Blocks
4:24.4 O.PA[]=OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
4:24.4 O.SA[]=OOOOOOOOOOOOOOOO
4:24.4 + Calculate User BIN… CE(0-0)
4:24.4 — Bad Wl = 0,0
4:24.4 — FW Spare = 16,25
4:24.4 — Calculate capacity D1: WL(Good/Bad) = 128 / 0
4:24.4 + D1 Good Block(E=0,O=0,F=0)
4:24.4 + F0: T24 special Mode = 00, Size = 0 MB
4:24.4 ### Err: ZERO Capacity: 0 (MB)
4:24.4 ### F0-Err:0074 ###
4:24.4 [RESULT] ErrorCode: 0074
4:24.4 + Static Summary: B=0 ,P=0 ,S=0 ,Others=0 ,D1B=0 ,D1P=0 ,D1S=0 ,D1Others=0,

[ 2020-10-08 12:18:21 ]
[ UPTool takes 00:04:25 ]
Читать дальше →

Фирменный Verbatim 32 ГБ USB был 2 USB до 1-30 ГБ 2-12 КБ
формат не работал
Отформатировал прошивкой программами рекавери usb 16 gb упал
Еще раз перепробовал все программы flash recovery, сейчас 0 кб
uptool ver.2.092 3% возвращается, затем не работает
UPTool_Ver2088 выходит из строя после 95%
ГДЕ Я НЕПРАВИЛЬНО
ЕСТЬ ЛИ ЭТИ ЭКСПЕРТЫ РЕШЕНИЕ?
Описание: [F:] [I:] Запоминающее устройство USB (Verbatim STORE N GO)
Тип устройства: Запоминающее устройство большой емкости

Протокальная версия: USB 2.00
Текущая скорость: высокая скорость
Максимальный ток: 200 мА

Идентификатор USB-устройства: VID = 18A5 PID = 0302
Серийный номер: 0701280E89B25A53

Производитель устройства: Verbatim
Название устройства: STORE N GO
Версия устройства: 0100

Производитель: Verbatim
Модель продукта: STORE N GO
Версия продукта: 5.00

Производитель контроллера: Phison
Номер детали контроллера: PS2251-67 (PS2267) — F / W 06.03.BA [2012-07-09]
Код Flash ID: 98DE94827656 — KIOXIA TC58NVG6D2GTA00 [MLC-8K]

Инструменты в Интернете: dl.mydigit.net/special/up/phison.html

Возможный артикул вспышки
— [1CE] TC58NVG6D2GTA00

Таблица сопоставления идентификаторов Flash
— [Канал 0] [Канал 1]
Verbatim brand 32 gb usb was 2 usb before 1-30 gb 2- 12 kb
format didn't work
I formatted it with flash recovery programs usb 16 gb fell
I tried all the flash recovery programs again, now 0 kb
uptool ver.2.092 3% comes back then fails
UPTool_Ver2088 fails after 95%
WHERE DID I WRONG
DO THOSE EXPERTS HAVE A SOLUTION?
Description: [F:] [I:] USB Mass Storage Device (Verbatim STORE N GO)
Device Type: Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA

USB Device ID: VID = 18A5 PID = 0302
Serial Number: 0701280E89B25A53

Device Vendor: Verbatim
Device Name: STORE N GO
Device Revision: 0100

Manufacturer: Verbatim
Product Model: STORE N GO
Product Revision: 5.00

Controller Vendor: Phison
Controller Part-Number: PS2251-67 (PS2267) — F / W 06.03.BA [2012-07-09]
Flash ID code: 98DE94827656 — KIOXIA TC58NVG6D2GTA00 [MLC-8K]

Tools on web: dl.mydigit.net/special/up/phison.html

Possible Flash Part-Number
— [1CE] TC58NVG6D2GTA00

Flash ID mapping table
— [Channel 0] [Channel 1]
Читать дальше →

Description: [G:]USB Mass Storage Device(SanDisk Ultra)
Device Type: Mass Storage Device

Protocal Version: USB 2.10 < — Hint: This device can run faster when plugged to a USB3.0 port
Current Speed: High Speed
Max Current: 224mA

USB Device ID: VID = 0781 PID = 558A
Serial Number: 4C530001260130113422

Device Vendor: SanDisk
Device Name: Ultra
Device Revision: 0100

Manufacturer: SanDisk
Product Model: Ultra
Product Revision: 1.00

Controller Part-Number: Unknown

the usb like this one in shape at link below

www.westerndigital.com/en-gb/products/usb-flash-drives/sandisk-ultra-dual-drive-m30-usb-3-0-micro-usb#SDDD3-032G-G46
Читать дальше →

controller-part-number-unknown-0xbc plz help…

Description: [F:]USB Mass Storage Device(TOSHIBA TransMemory)
Device Type: Mass Storage Device

Protocal Version: USB 2.00
Current Speed: Full Speed
Max Current: 200mA

USB Device ID: VID = 0930 PID = 6544
Serial Number: AEBB22F650EECF20A14434CE

Device Vendor: TOSHIBA
Device Name: TransMemory
Device Revision: 0100

Manufacturer: TOSHIBA
Product Model: TransMemory
Product Revision: 1.00

Controller Vendor: Solid State Systems
Controller Part-Number: Unknown — 0xBC
Flash ID code: 983AA8927650 — Toshiba TC58TEG7TDKTA00 — 1CE/Single Channel [TLC-8K] -> Total Capacity = 16GB

Possible Flash Part-Number
— TC58NVG7T2JTA00
[1CE]TC58NVG7T2JTA00 x 1 pcs/Channel x 1 Channel
[1CE]TC58TVG7T2JTA00 x 1 pcs/Channel x 1 Channel
[1CE]TC58TEG7TDKTA00 x 1 pcs/Channel x 1 Channel

Flash ID mapping table
— [Channel 0] [Channel 1]
983AA8927650 — — — — — — --------
Читать дальше →