Помогло… Спасибо

I Forget to Say Somting
Plase Read Accurate

My Friend have Jet Flash V 88 Alcor 6990+Micron L74

He Say Me I Have A best Nand (Orginal Brand Micron L74 (not SpecTek mark))

But Lose Frimware Why? Its MLC and Good Mlc?

Answer:

Jet Flash Used Frimware 8413 For Single Channel L74

Read 27
Write 12

So In True Micron L74 Real MAX one Channel Speed is w=8 Read =22

Jet Flash Is OverClocking For Good Speed But In Real If We Have L84 also In 1 Chennel 1Ce =Max Write is =12

In JetFlash V600 And V620 Also We See Mor Than 20% Lose Frimware

So In Some Frimware Used Over Using Of Nand Memory Ability

Also 100% I Say 100% Phison 2251-03 and Toshiba Tlc ed3 Is Write Prodect Error

Why?

Ed3 Rel Write Speed Is 4.2 Mb

May Be Some Frimware Used 4M Buffer But You Buy This And Undrstanding Me After 2 Week

Есть флешка Silicon Power Touch 850 16GB Titanium — монолит

Now 2267 Used TF16G2JAHA 98 de 98 92 72 d7

And SMi Used Sumsong K9ACGD8U0M

And Usb 3 =2203 Used 1 Flash 2ce Toggle

After All Write Speed Is So Important Than Read Speed

Bec In digital record if write speed is low in recordedd File make noise and Crupted

And Time

Tlc Memory is Pressed And 50% may be Losed Frimware and Lost Data

in 90% Dammeged Flash =We Know the nand is tlc

2261-ed3 I think in 100 Make 80 Flash Losed Frimware

Phison Make 12 Frimware For Ed3

3.a.53 =3.10.53

3.b.53
and
3.C.53

But Memory Is Not Good We Cant Assurance Data on Tlc Flash

In Ssd 100% Used Mlc Flash

Now Micron And Intel Make l72,l74,l83,L84

But We Just See Sandik And Toshiba Tlc

If Lucky =Sumsong Toggle

So Flash technology is not good to go to our

In Toggle Flash We Dont Need Dual Channel TO meke Read Speed To 30

New Jet Flash Used K9ACGD8U0M Tlc Toggle Flash

in 8Gig Read =30 Write =5

In 2Ce Or K9BDGD8U1M Read =30 write =~12

Not Bad So Better Of ED3

I Test Mlc And Tlc Toggle On Sm3257 Ena

REsult

Toggle Memory

Also Ite 1165_1167_1167b Have A Multi Channel But Ite 1170 Havent Multi Channel

Realy I dont know Why ?I think New Nand 19nm May Be Have A Problem In Multi Channel

telecharger

*Голая* )))

У меня флешка silicon power 8 ГБ, винда реагировала на включение флешки, а ни одна прога восстановления не видела ее, коротнул 43-44 ножки и она заработала!!! Вот только корпус после разборки восстановлению не подлежит, она теперь колая у меня.)))

Та же фигня 64гб Ultra SX1 5 месяцев не форматирует. удаляеш данные видео например. удаляются, закидаю новое вынимаю карту с компа и вставляю обратно в комп всё возвращается на свои места, я думаю нада менять по гарантии хочу попробовать гарантия написали 60 месяцев.

Спасибо помогло!
6690 тошиба 43 нм Д3 нормал флеш
юююхууу

А можно что то сделать если показывает 2048 бэд блоков.Походу на выброс только я так понимаю

Не получится — в инструкции указано, что возможно включение лишь одного образа с Vista, 7 или 8.

hi everyone.
How to recover lost capacities of transcend 4gb after formatted? 4 GB dropped on 1,6 GB.

For note, I formatted it in windows xp using right-click and then click format… Sorry, I dont use Transcend Formater before and maybe this is my mistake. Before formating, the usb flash drive infected by virus. I dont know. :(

I checked capacities in Disk Management, but have not unalocated capacities. I got same result when using Diskpart in command prompt, EASEUS Partition Master 7.1.1 Home Edition, BOOTICE, HDD Regenerator, HDD Low Format, HP (USBF), Flash Drive Tester v1.14. And sure, I used utility in recomended file here too. But nothing.
Ok, slow down, the transcend took by my friend. Last week. But for me, I want to know a solution to recover other usb flash drive. if, the problems fall in case of lost capacities.

thanks

Description: [G:]Çàïîìèíàþùåå óñòðîéñòâî äëÿ USB(2250 PRAM)

Protocal Version: USB 2.00
Current Speed: High Speed

USB Device ID: VID = 13FE PID = 3100

Device Revision: 0110

Product Model: 2250 PRAM
Product Revision: 1.00

VID = 1043 PID = 8012

try AlcorMP(11.02.17.01)

before mp take picture of your flash «controler name must be show „and i help you to fix it