FINALY SPEED IS:



BELIVE OR NOT BUT IF WE HAVE A GOOD NAND WRITE SPEED WELL IN USB 2 CONTROLLER

BUT IF WE HAVE 2251-03 DUAL CHANNEL OR IS903 DUALL CHANEEL SPEDD IS READ =90 WRITE =40

NOTE:

1= IF USED TS TOSHIBA OR SANDISK MLC SB MUST BE CLOSED
2=IF USED SUMSUNG 21 OR 19 NM TOG TLC USED SB CLOSED

3= CONTROOLER MUST UNDRSTAND HOW MANY FLASH INSTALL ON PCB SO 1+2 FOR 2CE * 2PLANE

2+3 FOR 1CE *2 PLANE

R28 = IF USED TOGGLE FLASH R28 MUST BE CLOSED

BE carefuly INSTALL 2 16GB MLC NAND IN SMI 3257EN

WHY I AM USED SMI 3257EN?

HAVE 72BIT ECC

AND SUPPORT TOO MANY NAND MEMORY

AND IN WRITE SPEED SO MANY BEETER OF 2267 OR ITE 1171
AND LOW COST

nand name is DFT128GW08H2GMD==>ADDE94DA — Hynix H27UCG8T2ATR 16K MLC 40BIT ECC 2CE *2 PLANE

so controller is destroyed but Alwayes Nana Is safe

What we can Do?

I Buy Silicon power 4gb (Sm3257ena) and use Pcb

if not working well use Fc tool

I think your controller is FC

before use open the alcormp.ini
change line
[VendorInfo]
VID=0011
PID=7788

AlcorMP_v13.02.05.00

and you can download from upan.cc ,,usbdev.ru

close nand pin 29+30

for 5 second
after that use RecoverTool_V2.00.42_M1223 8CE

after 3 second «cut the wire»

use mpall 2.29b

use frimware 3.A.10

If not show drive in my computer take a picture from inside flash «pcb» controller and nand must be show

use new ChipGenius_v4_00_0030.exe

if windows show drive name «example h:\» frist use OnLineRecovery_v1.0.0.36.zip

if cant fix that

use GetFlashInfo or ChipGenius_v4_00_0030.exe to explain all information of flash drive

ramin ALCOR MP_v14.01.24.00

Used 2 CE *2 Channel ok? May be 1 or 2 nand is UNPLUGED so RE SOLDRING ALL NAND Pins

may be nand flash pin is Unpluged
corsair PCB Alwayes Used 4 Or 8 Nand Flash and Bec is Bigger of other Pcb May Be You

open the flash Cover And Resoldring Again