1-DO Not Use Smi Factory
2-Create Cd Room Not Good In Smi Try It (Phison 2251(famly))

3-download this «RecoverTool_V2.00.33_L1224» and click the recover

HASSAN USE MPALL 2.29.B GO SEETING AND DO IT
حسن تنظیمات که تو عکس انجام دادم و مو به مو انجام بده
بعد هم بگم داداش این شد دوباره کاری یک بار بالا توضیح دادم که باید فریم ور بزنی !!!!

hassan e flash dashti azash ax beger bendaz inja 13fe boda hamoon

az trancend e tam e ax beger bezar enja kimaket kinam

حسن اقا مموریت خرابه با هیتر بردارش یه مموری چهار کیلو ،پنجاه نانو یا سی و چهار نانو بهش وصل کن

Dear vovoka First Take a look Shimitanic and tell me where is the problem
and I always say Just Use 5 Second To Shock Close Input Out put data bus!!! After All thank you i will test your Way

dear sacha Your controller is alcor micro so you use alcor mp 13.02.5 and Tell us what can you do

I Hope to you can fix it
and i hate san disk -I hate sandisk& I Fu… sandisk company

After Comming san disk Pen drive is Realy Dead
Speed =5 mb
all company used sandisk

sandisk 1ce(8g)ed3 =2.3 $ in 300 picc

but all user lust data in easy =40 ~50 % bad Block ??????
so sandisk Traitor to all people in the world

Alcor mp Read Frist alcormp.ini and theis line

[VendorInfo]
VID=058F
PID=6387

so if your flash vid and pid not mach alcor not show drive in the table
for ewxample:

i have trancend 2g=au6986+hynix mlc(4k)& vid=8564 pid=1000

and i ghave alcormp 10.02.05

so WE MUST EDIT ALCORMP.INI And CHane THis

[VendorInfo]
VID=8564
PID=1000

فدات داداش میذارم سایت ایرانی با پول میفروشن ناراحت میشم هر کی مسلمان نبود با معرفت بود

im not undrstand your mean but: i Test it and i Did it And 100% Work Well In ((HANGED FLASH PROBLEM))

link===http://flashboot.ru/files/file/12

058f+6387=au6987 or au6690

download this program

AlcorMP_AU698x_RT_v1.0.0.14_L0117

Alcor Mp Alwayse Detect Vid And Pid Normal From ALcormp.ini

For Example
If You have Trancend 4G (6986+Sumsung mlc4k)

You Must change Vid=8564,pid=1000

if you dont Match The Your Flash And Mp tools Vid And Pid Program Never Detect Your Flash

ok open the alcormp.ini

and Change This To Detect Your Flash!!! It Is So Easy man Dont Worry I help You

go to line Vender Info

[VendorInfo]
VID=058f
PID=1234

Frist Of All Hi To All

Second You Use Old Mp Tools
You must Use 2013 mp Tools

AlcorMP_v13.02.05.00

Before insert To Pc Connct Left Side Of Led Base To Gnd Then Insert To Pc After 5 Second Let Flash free
I do It and Fix Problem Like Yours

no old Flash Is so and So better than Modern Flash

I have 1 Flash Like Yours
ss690-B1+Toshiba MLC

Read is =22
Write Is 16MB!!!

But All moder Usb flash Used ED3 And Speed Has So bad for Example

Silicon power In 2013
2261+ed3
trancend
6989an+sandisk(ex3)
a-data
sm3257enna+sandisk ex3

All New Flash
Read is =15~18
Write Is JUST 5 mb

So I love My Old Flash Because all old Flash Used Best Memory Chip!

Yester Day i Tested avv method and 100% Woked In Smi

he connect Gnd(Ground )to Led Left Side (he Stoped Blinking (Crystal Truned off))and some flash hanged is let go memory for few second and we can Re Mp tools I Try in (sm3255ab +sandiskTLC)and I can Fix It Thank You All For Sharing your Experience

dear yamal use flash extractor or o ChipGenius_v4_ to find controller name
after found everything is easy
good night

ok you can did it Greetings! 16Gb is Expensive