probably already knew all the partners of Connecting vcc to controler? i…

I was hoping I have a good partner, but it did not happen and I'm not scoring value, but is treated like a stranger to me no answer it did not'm after solution? As a leprosy؟
َ

when direct voltage connect to nand flash flash id is changed to 04 04 04 04 and nand flash is turned off and
computer detect frist frimware you Imitation of silicon power Solution but is wrong in other flash
i made the Solution just for phison in other controller you connect +5 to nand flash not memory controller

After all about am writing i dont have 1 thanx??????? but how ever
i ask Question no body answer me, so thank you all so much!

hi to all ,some one help me so happend here? i cant undrstand rus
Finaly You can fix that? if micro controler leg is too short use the shemitanic and install the way of board in Flash

After Use U3S_SafeErase_V116 to Eraes All Block And Old Frimware
use «SSS_MP_Utility_v.2162.rar»

open The Flash Cover And Read Flash Name Your
01010101 — Spansion [SLC]
Spansion Have No slc Frist Soldering Again By heater

We Conect +5 volt to Close Second Frimware in Flash Chip After See Drive In My Computer Cut The Wire for up19
Acsees to Flash And After Frimware Led Is blink

hi vasanth
Open Flash Cover And Read Flash Name Ok?
For Example i29f32g1212

1 easy Way and danger

you use preformat.exe 1.42.0.0 and fix that
but if you controller is ps2267 or pss2261 your flash is dead!

Every Flash Have 2 Frimware
1-Based in controller (ps2250 for Phison 2251-50-f or Usbmemory bar for smi and ut167xx for ite )

2-based in Flash Frim ware

If your Problem is Device Type not =3 (not has a remoaveble ) you can strat up Flash By Frist Frimware And Do Frimware Again!

How Ever THis IS i Made him !!!

Note:
If Flash Used MLC-8k Or Mlc-4k(2pcs have 2 Core) Flash Speed is Good
If Flash Used Mlc Dual Channel Flash Speed Is Very Good
If Flash Used TlC -Or Ed3 Flash Speed Is bad!
Patriot Memory Always Use Dual Channel+Mlc 4 or Mlc 8k and Use Last Frimware
And have a Best Speed
Philips Always ed3 or tlc And Have a bad speed
Transscend Always Samsung Mlc 4k (2pcs have 2 core in Flash ) and have a normal Speed

Erase All Block And Install Last Mptool

Install 2 Hynix In Dual Chanell

Extract Hynix From Silicon Power

Composition 2 Flash

Hi

i have 2 8Gig Flash

Silicon Power 8 Gig=ps2250+Hynix H27UCG8T2MYR — 1CE/single Channel [MLC-8K]

TeamGruop 8Gig=ite1167b+Hynix H27UCG8T2MYR — 1Ce/single Channel [MLC-8K]

so flash memory in 2 flash Not different

I decided to make 1 flash 16Gig

so i chose ite1167b

every one know ite1167b powerFull than Phison 2251-50-f

so i extract hynix memory of silicon Power And install it on ite1167b(my TeamGroup Flash)

Download The last ite1167B tools

frist of all Click on Erase All Block
And Install New FrimWare

Very good results came

Now I Have one Power Full 16G
Read Speed is 28Mb! great for Usb 2
Write Speed is 12mb great for Usb 2

connect wire just like that and run smi tools tomarow i see that and i help you